Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

help with laquer decision

Posts

help with laquer decision

#1

help with laquer decision

Sascha

>� ok, i just ordered a spray setup to put laquer on some of my pieces. i ordered from Homestead, Jeff Jewitt was

of great help and put a convertion HVLP system together for me. i ordered a 1 gallon pressure pot, a nice

gun(forgot to ask which one he is sending) and an additional gravity fed gun. with the nice gun, i told him to

get me the best one he thinks, i'll call him tomorrow and ask him which one.

my question now is WHICH laquer to spray. his recommendation was Sherwin williams either the T70 series,

T72 series or the cab acrylic laquer T75 series. T70 and T72 are out for me since my local serwin

williams(california) needs to see a permit, but they do carry the T75 series. problem is, they only have the 5

gallon buckets and the laquer has a pot life of 6 months. there is no way i'll be using that much, so i'll probably

throw out 4 gallons of that.

also, I don't have space for a real spray booth, i can rig something up, i don't mind going alll out with fan and

such, but i need ideas for a small tear down booth that i can either use in my shop or outside. � any ideas would

be appreciated, maybe some of you could send me an e-mail with pics of their setup.

then, today, i talked to my local serwin williams store and they recommended Kem Aqua, water based laquer or

the Sherwood low VOC � laquer, both have a much longer pot life and are available in 5 gallon buckets, the Kem

aqua is supposed to stay clear where the Sherwood might get some yellowing.

since i have never sprayed before, i need a recommendation, maybe i should get a different kind of laquer all

together, but i don't know what to pick.

please guys, fill me in on the secret of laquers, which kind to use, water based or Solvent based, NC/Cab or low

VOC. which manufacturer is preferred.

thanx so much in advance guys

sascha � � �

Re: help with laquer decision

#2

Re: help with laquer decision

Joel Hunnicutt

>I spray T70 and also cab acrylic. The cab acrylic is water clear and is

a very nice finish. However, it will not "warm" the wood like T70. I find that trait very desirable for some woods (mostly maple) but do not care for it at all on others (cherry, walnut). I think you will be pleased with any fo the Sherwin Williams lacquers. I am attaching a picture of a piece finished with CAB acrylic


img

Re: help with laquer decision

#3

Re: help with laquer decision

Sam Simpson

>Hi Y'all,

Thems a lot of questions Sascha.

The truth is, you are going to have to creep up on the finishes that suit your work. There is no one lacquer that is perfect for every application. A plain ole nitrocellulose comes closest. A typical journey would be to start with brushing lacquer, then graduate to spraying lacquers, then refine your needs to instrument lacquers.

I think you need to find a supplier who can supply you with gallon sizes or smaller. If you can't find one locally you could mail order from one of the catalogues. You might try Woodworkers supply. Take a look at their Behlen lacquer products range, and buy a few of them. Then learn how they all work. What advantage or disadvantage does a vinyl sealer offer? When, and when not to use a sanding sealer? Why does it take twelve coats of lacquer to arrive at just a three mil final thickness?

Technically the best lacquer for a particular job is the one which has the closest hardness and flexibility ratio that matches the wood and work piece. That's what sets musical instrument lacquers apart. They have a flexibility that will keep pace with a vibrating box. Quite often in the small craft or woodworking field, a musical instrument lacquer will be superior because of thin or various thickness wall sizes that tend to expand and contract at differing rates.

Regards Sam Simpson

Re: help with laquer decision

#4

these are the guns i am getting.....

Sascha

>so maybe this helps. i just hung up the phone with jeff and he likes the lovos SW product a lot.

so now my order is 2 Walcom GEO"S and 2 of the 1gallon pots plus a smaller gravity fed gun. one pot is for laquer, the other for sealer.

sascha

Re: help with laquer decision

#5

Re: these are the guns i am getting.....

Les Robison

>I used to buy almost all my finishing supplies from Jeff Jewitt. I used a lot of Oxford and Target water based lacquers and varnish. I would even spray water based Poly on occasion. Talk to Jeff about the use of those finishes. The Walcom gun you bought is like the one I used most of the time. I also had a mini Walcom gravity feed. They both handled the water based finishes very well. I seldom used nitro lacquer due to the combustability issue.

Les