Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

VersaChuck *LINK*

Posts

VersaChuck *LINK*

#1

VersaChuck *LINK*

Mark Kauder, Phenix City, AL

>Any Opinions on this? New chuck from the UK that will accept most other chuck jaws.

Mark


VersaChuck

Re: VersaChuck *LINK*

#2

Re: VersaChuck

albertabob

>Wonder what this is about?

Also, what's a back plate?

(NB: Accessory jaws designed for use with the Stronghold chuck

will not fit these mounting jaws.)

Bob

Re: VersaChuck *LINK*

#3

Re: VersaChuck

John Lucas

>Mark Looks kind of interesting. I'm confused about the jaws. Do you read it that you need to get the right size inner jaws for whatever chuck jaws you have. In other words it doesn't look like the chuck itself will take anybodies jaws. You have to purchase the inner jaws (or helical jaws) to fit each jaw style that you have. Boy that is confusing me. Does this make sense. In other works if you want to swap from Nova jaws to vicmarc jaws you need leave them attached to the inner helical jaws and replace them with a whole new set of inner and outer jaws. I may be wrong but that's the way I read it. I can't call them from here to find out.

Re: VersaChuck *LINK*

#4

Re: VersaChuck

Eduardo Sarmiento Hall-Lima Peru

>Well having talked to the guys at tool post they say the few jaws they have it will fit fine the Co is making others adapters for strong hold

and the backing plate is the same as an adaptos for ones use the diference is a whole plate that goes in the back of the chuck,just like a machinist chuck

Re: VersaChuck *LINK*

#5

Re: VersaChuck

Colin Spencer

>John

I have just ordered one of these. It does come with three sets of scroll jaws: Nova, Axminster and Oneway. It also comes with a set of dovetail jaws (Axminster). These are just like your existing scroll jaws for whichever of these chucks that you have. You just un-bolt your existing jaws ffom your chuck and bolt them to the scroll jaws, as normal, on the Versachuck. The backplate is the part that is threaded for mounting on your lathe spindle and is spindle thread specific.

Colin

Re: VersaChuck *LINK*

#6

Re: VersaChuck

John Hay

>Colin,

I hope you'll post your opinion when you've taken the chuck for a spin a few times. The Tool Post info appears to be the answser to prayer and too good to be true... yet Peter Hemsley is clearly runs a first rate operation.

Re: VersaChuck *LINK*

#7

Re: VersaChuck

Colin Spencer

>John

Just arrived in the UK today and it was waiting for me at my UK address. I will be back in Spain and in the shop on Friday so will post some more information then. Looking at it it seems well made. The back plate is in fact a Sorby one (still in the Sorby plastic pouch). It does have 3 sets of jaw carriers and the Axminster C jaws are fitted. The wooden box is of poor quality BUT I wasn't worried about this anyway.

Update by the weekend.

Colin