Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

The result

Posts

The result

#1

The result

Carole in VA

>This bowl took me longer than any other piece I have done and all of the time was spent refining my skills in dealing with strange grain. Because of that, it is not quite the original form that was intended. This piece of maple has it all...ambrosia, curl, and spalting. I'm glad I didn't give up on it because it turned out to be some pretty wood. I am proud to say I never had to resort to the 80 grit gouge. Thanks for all your tips and help! I shot this before buffing because I didn't want the hot spots in the pic.


img

Re: The result

#2

Re: The result

John K Jordan

>Very nice! Can you share the technique(s) you tried and what worked and what didn't?

JKJ in East TN

Re: The result

#3

Re: The result

albertabob

>Excellent result Carole.

Had I seen the entire piece at the outset I would have advised you differently. It looked for all intents just a 3 x 8 inch slug of walnut.

Instead in turns out to be a very fine piece of charactered wood and well worth the effort to bring it to life.

Agian, nice job.

Tell us what worked for you.

Bob

Re: The result

#4

Re: The result

Carole in VA

>Thanks, I found that once the piece was flipped and the tenon chucked, the problem was not quite as bad. I used what I call a vertical shear cut...don't know if I can describe it or not! Use a gouge (sharp!) with very long wings, nose at about 10 or 11 o'clock, flutes toward the wood and handle way down. Raise the upper flute barely away from the wood. The lower one is taking a very, very fine shavings sort of on the diagonal as you draw it across the wood. Does that make any sense? Now if I could just figure out how to handle rough grain on the INSIDE! LOL

Re: The result

#5

Very nice!

Mike Schwing from Md.

>I'm glad you stuck with it. Very pleasing form and appears to be a very nice satin finish. Great work!

Re: The result

#6

JL

Re: The result

JL

>Marvelous. Is it my eyes or the computer? That's on the dark side for maple. I love the form.

Re: The result

#7

Re: The result

Rick Allen

>Nicely done. The beauty of this turning is not in the result but in the journy that you took. That the turning happens to be stunning is nice also.

Re: The result

#8

Really Nice!

Ron in Drums PA

>Looks like your patience paid off.

Re: The result

#9

Re: The result

John Lucas

>Very nice. You should be proud of that one.

Re: The result

#10

Re: The result

Jack Savona

>Patience does pay off! I enjoyed seeing your fruitful perseverance. Makes me want to 'stick with it' for future difficult pieces. Thanks.

Jack

Re: The result

#11

Re: The result

Carole in VA

>JL,

It is dark, but the back side is lighter with quite a bit of what I call "lights" to it, but they never seem to show up in a pic.

Re: The result

#12

Tis.....

tdaniel

>a very nice "keeper". That is more difficult shape to make but it was worth the effort!

Re: The result

#13

Re: The result

Eduardo Sarmiento Hall-Lima Peru

>Well done is a nice turning and finnish queep it up

Re: The result

#14

Brad Vietje

Beautiful !

Brad Vietje

>

Re: The result

#15

Beeeautiful!

Jennifer@Indy.USA

>Carole,this is wonderful! I love this form. Way to go....bravo!

Jennifer

Re: The result

#16

Re: The result

Dick Parr

>Beautiful job Carole, I love the form and the wood.

Dick in Knoxville

Re: The result

#17

Re: The result

Ed Kelle

>I like everythng about it. Looks like a piece just begging to be held. that's really maple huh? Very surprising. One thing I enjoy about turning is that you are never quite sure what to expect.

Great job!

Re: The result

#18

Re: The result

Carole in VA

>Ed, this is the only piece of wood I have ever bought. It was all by itself on the shelf at Woodcraft and it looked so ugly they had lowered the price! Surprise, surprise! LOL

Re: The result

#19

Keith Tompkins

Re: The result

Keith Tompkins

>Hi Carole, nicely done......did you end up honing the edge ? I think the tool angle you described was what Brad, I, and others were trying to suggest.

Re: The result

#20

Re: The result

Carole in VA

>Keith, no I did not need to hone it. I posted a pic of the cut that I thought might help some other newbies like myself. Sometimes it is hard to visualize something in words.

Re: The result

#21

Re: The result

Ed Karch

>Beautiful job again. Are you still on the mini or have you gone bigger? I will be down to visit one of these days with a truck load of scrounged wood.

Ed

Re: The result

#22

Re: The result

Wayne Leach

>Carole,

Stunning result! I love the character and color of the wood and the satin finish (which I am partial to) really enhances it! Its work like this that keeps me interested in turning! Just wish we had other wood around here beside poplar, black ash and birch!

Regards, Wayne

Re: The result

#23

Re: The result

Carole in VA

>Ed,

I am still on the Mini. :( Come on down anytime - with or without wood! Love to have fellow turners visit. Just give me a shout ahead of time so I can be sure and be here.