Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

slate turkey calls

Posts

slate turkey calls

#1

slate turkey calls

don lewonczyk

>Anyone one out there turn turkey calls? I'd like to try to make a few for my son and his friend but I don't know much about it, like where to get the slate, what kind of wood is best, what to make the scratcher from etc. Any help would be great. Thanks Don

Re: slate turkey calls

#2

Re: slate turkey calls

Danny Wells

>Don,

I don't turn slate calls, I turn trumpet yelpers. But I have looked at a ton of slate calls. CustomCalls Online is an excellent resource. Very helpful folks. But I would do a lot of reading before I starting asking questions. The forum is searchable. http://www.customcalls.com/cgi-bin/yabb/YaBB.pl?board=turkey_brd

Custom Sawing also has kits available along with slate, glass and aluminum. Slate calls are also known as pot calls. You might want to buy a kit and see how it is done and then go from there. If you go to the pot call page and go to the very bottom of the page, there are directions for making a basic pot call. Here is there link:

http://www.customsawing.com/

You can make pot calls from almost any wood that is hard. Strikers can be made from any hard wood, the harder the better.

Let me know if you have any other questions. There are some guys on the forum who also sell the slate and glass.

If you can turn a very basic bowl, you can turn a pot call.