Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Anyone have experience with rhododendron?

Posts

Anyone have experience with rhododendron?

#1

Anyone have experience with rhododendron?

Dave Smith, Longview, WA

>A neighbor dropped off some large pieces of rhododendron this afternoon. The pieces are upwards of 8" in diameter. Unfortunately he cut the plant last week and just thought of me today. A considerable amount of wood was lost due to cracking on the exposed ends. I am processing what I can save. There are a couple of bowls soaking this evening that were turned from a large crotch. He also left a piece of wood that he said was from a shrub that has white leaves. That really narrows it down. It is twisted like a wisteria or grape vine. At about 4" in diameter and a foot long I hope to get something out of it.

The bowls turned so far are 7" in diameter and were taken to 1/2" and 3/8" in thickness. It won't take too long to find out if that was a bad idea. I reckon that by the weekend the bowls will be potato chips, split kindling, or about ready to turn. The wood is light in color but shows some indication of grain variation. Can I expect the color to darken when it is dry and exposed to light?

Dave Smith

Collector of odd wood in Longview, WA.

Re: Anyone have experience with rhododendron?

#2

Re: Anyone have experience with rhododendron?

John K Jordan

>>rhododendron?

A few years ago a friend gave me a number of pieces of rhododendron root. These were only a few inches across but had dried for years. They had been rough turned into cylinders and obviously warped considerably when drying. However, I suspect root behaves nothing like the wood above ground. The figure in the root is incredible.

Did you try google? A quick search with RHODODENDRON WOODTURNING indicates people have been turning rhododendron. I found one article which described experiences in turning a bowl and chinese ball from rhododendron, saying the turner was "amazed at how easy it cut".

JKJ in East TN

Re: Anyone have experience with rhododendron?

#3

Re: Anyone have experience with rhododendron?

Gary in Zirconia, NC

>The rhododendron I have turned has split and moved a lot, but I have gotten some good pieces from it. It turns nice and has a fine grain. Yes, it will darken. If you can get the root ball, that is the best part.

Re: Anyone have experience with rhododendron?

#4

Re: Anyone have experience with rhododendron?

Les Robison

>Dave, I just turned a rhododedren toot 2 days ago. It was easy to turn, after getting it to the general shape. I created a hollow vessel and the grain was wild. Lots of birds eye, swirls, different figure everwhere you looked. It does have some cracks and I hope they don't grow.

Les

Re: Anyone have experience with rhododendron?

#5

Re: Anyone have experience with rhododendron?

Steve

>This is a rather seredipidous posting. A coworker recently dug up some 20' tall rhodys and has the root balls still in his yard. One is too heavy to pick up and the other is almost as heavy. Both are at least 24" in diameter. Are there some suggestions as to how I should cut and treat them to maximize the wood and minimize checking?

My lathe is too underpowered to take advantage of the large sizes so they will wither have to be stored for years until I can afford a good lathe or cut them down to usable sizes.

Re: Anyone have experience with rhododendron?

#6

Re: Anyone have experience with rhododendron?

Gary in Zirconia, NC

>I'd seal them really good since this stuff really moves if your going to wait that long. Best is to turn asap. They usually have good figure all through them so just cut to sizes you can use.