Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

vacuum pump

Posts

vacuum pump

#1

vacuum pump

Dawn Adams

>I remember hearing somewhere that I should not turn off my vacuum pump when there is vacuum suction on a bowl - I should bleed the vacuum from the regulator instead and then turn off the pump. Is this the right thing to do, or can I just turn off the pump. Will this harm the pump in any way. Thanks in advance.

Re: vacuum pump

#2

Re: vacuum pump

Mark Mandell - Gone Round In Jersey

>Dawn,

When you're using the vacuum, small amounts of condensed moisture either from the wood or the air (or both) may gather on the pump's interior surfaces. If you simply shut off the pump, the condensate stays there and can, depending on its composition, degrade the surfaces and seals of your pump housing and vanes. If, on the other hand, you let your pump run at full air flow for a minute after you've completed the job, you'll give the pump a chance to dry out.

First the reason, then the answer,

yes, leave it running. |;-}}