Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cherry bowl from larger core...

Posts

Cherry bowl from larger core...

#1

Steven Antonucci

Cherry bowl from larger core...

steve antonucci

>This bowl is a gift to my cousin who is getting married in about 3 weeks. It is cored from a much larger section of the log with my less-than-perfect coring tools, but I got it out, and I am happy that the wood was made into something useful.

The bowl is from a black cerry tree taken by ice storm almost 2 years ago at my MIL's house. It is ~10.5" x ~4", and was wet wanded with mineral oil to about 400 grit. I turned two 1/8" beads in the top to make it hard to clean, and sprayed Deft varnish from the can (2 coats) before a final coat of wax.

Here is a pic from overhead.

Steve


img

Re: Cherry bowl from larger core...

#2

Steven Antonucci

Profile 

steve antonucci

>


img

Re: Cherry bowl from larger core...

#3

Steven Antonucci

Bottom 

steve antonucci

>


img

Re: Cherry bowl from larger core...

#4

Re: Cherry bowl from larger core...

e

>very pretty bowl -- i especially like the rim detail!

Re: Cherry bowl from larger core...

#5

Re: Cherry bowl from larger core...

Jennifer@Indy.USA

>Steve what a great looking bowl. I love the rim treatment that you gave it. I like the fact that you left the outer edge hard and then beaded the inner edge leading into the bowl. Beautiful piece of cherry too! What a great gift.

Jennifer

Re: Cherry bowl from larger core...

#6

Re: Profile

George Van in WI

>Nice bowl and rim detail Steve.....and to think this normally would have been shavings!

Re: Cherry bowl from larger core...

#7

Steven Antonucci

All of you seem to like the accident best :-)

steve antonucci

>I didn't originally mean to put two beads in the top, but I had the point of the skew catch, which caused me to nee to turn off some the rim. I had the middle bead in and it didn't look right, so I turned the inner bead - which is even with the rest of the rim(the picture makes it look like it's smaller).

The core to the other half will be my next attempt at a beaded bowl. Everytime I turn the beads, I end up turning them off because they never look right...

Steve

Re: Cherry bowl from larger core...

#8

Nice!

Ron in Drums PA

>

Re: Cherry bowl from larger core...

#9

Re: Cherry bowl from larger core...

Craig Daymon

>I'm going with the crowd, I LOVE the beads in the rim! Looks great and I've saved the image so I can pay the biggest compliment by copying it (or at least attempting something similar) some day. Looks great. I have to admit, I think the beaded rim is accented even more by the lack of embellishment on the outside. (Well, except for a great form.) Though, I have been told that the lack of something to run your fingers up against on the outside can make it just a little less practical.

Still, wouldn't stop me from using it. Great job Steve.

-Craig

Re: Cherry bowl from larger core...

#10

hush!

e

>you're not supposed to tell us it was a mistake; you're supposed to take credit for your innovative spark!

remember, programming bugs are 'design opportunities' ...

Re: Cherry bowl from larger core...

#11

Steven Antonucci

Proper credit: I think I stole the beaded rim from

steve antonucci

>Dominic Greco?

I remember seeing it here and thinking it set off the bowl nicely. Now as to where Dominic saw it...?

Steve

The originality of any design is directly proportionate to the obscurity of the source.

Re: Cherry bowl from larger core...

#12

Maybe..

Dominic Greco at home in Richboro, PA

>

Steve,

First off, very nicely done! And I'm not saying this cause' you mentioned my name! :>) I really love the beaded rim as well as the base.

I did turn a couple of bowls with a beaded rim like that. You might have seen that feature on a large cherry bowl I turned in 2004 (gotta' love the Turning Archive's search engine!).

But as long as we're being honest, I think I got the inspiration from Jennifer Shirley's work! :>)

See ya around,

Dominic