Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Lopping Blanks with C/S

Posts

Lopping Blanks with C/S

#1

Lopping Blanks with C/S

W.C. Turner

>When knocking off the corners with my chainsaw, in order to try to keep the blank from moving around, I sometimes use a bunge cord to strap it down.

How do ya'll safely knock off the corners of a bowl blank with the c/s?

Thanks,

W.C.

Re: Lopping Blanks with C/S

#2

Re: Lopping Blanks with C/S

Joseph

>I jam mine between two crossties. It's crude, but does the job.

Re: Lopping Blanks with C/S

#3

Re: Lopping Blanks with C/S

Gary Evans Tallassee, TN

>Here's what I use W.C.

I call it my TBPP. "Turning blank preparation platform"

In operation, I would normally use a pipe clamp with long jaws. I couldn't put my hands on it when I took this pic.

Gary


img

Re: Lopping Blanks with C/S

#4

Re: Lopping Blanks with C/S

John Lucas

>Gary I guess I'll have to stop using my foot and build something.

Re: Lopping Blanks with C/S

#5

Re: Lopping Blanks with C/S

John K Jordan

>>I guess I'll have to stop using my foot and build something.

Better the foot than the guy who said he was going to hold the blank with one hand and the chainsaw with the other.

JKJ in East TN

Re: Lopping Blanks with C/S

#6

Re: Lopping Blanks with C/S

Gary Evans Tallassee, TN

>Hi John,

Not much building involved in this. A "V" cut on the side of a log with the upper side of the "V" parallel to the top of the log. A "V" cut in the top to lay the round pieces in before they become square and a pipe clamp are all that is needed. Takes about ten minutes of prep work if you take your time.

John K.,

That guy obviously had not tried his method before if he still had a hand available to hold the blank with.

Gary