Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Sanding discs

Posts

Sanding discs

#1

Sanding discs

Dawn Adams

>I was wondering what your opinions were on the different types of sanding discs available. I am looking at the Packard Woodworks catalog and wondering what is the real difference between Hi-Per Gold, White Rhyno, and Hi-Per Green. Also, are the wave discs a large improvement over the regular disks. Any other sanding discs out there that are worth knowing about? Thanks in advance.

Re: Sanding discs

#2

Re: Sanding discs

Bob R

>I'll second that. What are the diff's? And are they worth the extra price. I'm not real happy with the 3M that I am using. Maybe I'm not using the right type?

THANKS

Bob R

WestMac Turning

Re: Sanding discs

#3

Re: Sanding discs *LINK*

Carole in VA

>I use the wave discs. You don't get the edge that might dig in. Best price I have found is at the following link. $13 per 100 for 2" discs. For extra fine sanding (1200 and above) I use MicroMesh. I want to try the Abralon stuff, though.


Performance Abrasives

Re: Sanding discs

#4

Re: Sanding discs

vicmarc.fan

>I am far from an expert but I find the Premium Green discs from Craft Supplies stay sharper longer than any other disc I have used. I don't know why. I find the cloth back gives out before the grit. Not cheap. 50 for $13.50 but I find they last much longer than the $8.99 Artisan discs. Plan to replace all my grits with this stuff. My old shop teacher used to say sandpaper is like toilet paper, both are meant to be used once

Ron

Re: Sanding discs

#5

Re: Sanding discs

Darryl Hansen

>Might try making your own. Industrial Abrasives sells 1 meter x 1yd excellent hook backed material for about $15. Use a 2" or 3" sharpened pipe that you can get from any plumbing shop and make your own for about 9 cents. The paper is great and outlasts everything I have tried except the green stuff in one of the other posts.

Re: Sanding discs

#6

Re: Sanding discs

John Lucas

>Dawn I've been happy with the Gold discs from Klingspor. I clean them after every use using one of the crepe rubber cleaner. They last fairly well on non oily woods. They clog up quick on cocobolo. I haven't done any price shopping in a while so I probably should do that.

Re: Sanding discs

#7

Re: Sanding discs

Glenn Madsen in the SF Bay area

>I'm new at this, but the folks in the SIG I hang out with aren't.

They recommended the Klingspor's odds & ends boxes, for various specialties. I bought a couple of them, but they are sitting on the lathe ways right now, waiting until I finish the seemingly never ending bathroom remodel. Maybe $50 delivered, for more sanding paper supplies than I can use in a year. And excellent quality goods, too.

The frugal folks took an old hole saw, sharpened it on a grinder, and used it to cut their own H&L backed disks by whacking it with a shop made mallet. Maybe that's how they paid for their big mustard-yellow lathes...

Re: Sanding discs

#8

Re: Sanding discs

Pat Mulligan

>Those green discs are the best I've tried so far.I found that I don't like the wave discs-can't get close to the foot of the bowls I mostly turn.I got two assortment packs-3"- from Red Hill-Supergrit and they had some ok discs but what I really liked are the disc holders from norton- blue plasticand a little more aggressive than the soft Australian ones from Packard.

Re: Sanding discs

#9

Re: Sanding discs

Dawn Adams

>I'm not as concerned about the cost - just wondering what disk is best in what situation. Once I decide on the type, I will then shop for best price.

Re: Sanding discs

#10

Re: Sanding discs

John K Jordan

>I use both the wave and round disks, the wave for wide areas of bowls and the non-wave for getting in close to features. If I had to use just one type I'd use the regular round disks.

JKJ in East TN

Re: Sanding discs

#11

George Balock

Re: Sanding discs

George Balock

>Dawn,

I've used the Wave and Hi-per gold disks, now I use the Klingspor Heavy Weight disks. The grit is gone before the backing wears out and I use them more than once. I found that the other disks came off the backing too easily for my use.

George