Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Cutting-Sealing-Camphor Wood Bowl Blanks

Posts

Cutting-Sealing-Camphor Wood Bowl Blanks

#1

Cutting-Sealing-Camphor Wood Bowl Blanks

Ken Oakley-Sunny St. Cloud, Fla.

>Today I aquired some logs cut from a local Camphor Tree. I want to cut them into bowl turning, etc. blanks and need to know what I have to do to prevent them from cracking. Some are 20+" in dia. All advice gratefully accepted.

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

#2

Re: Cutting-Sealing-Camphor Wood Bowl Blanks *LINK*

George Van in WI

>Hi Ken, I use Anchorseal after roughing my bowl, applied to the outside and inside; many get by with just the outside. I rough the bowls to leave a 10% of the diameter wall thickness. I do turn the lower bowl slightly thinner and that seems to help the splitting problem at the rim. I leave the logs whole and seal the ends till I’m ready to cut a bowl blank, at that time I do as Bill does, and rough the bowls immediately. If I do not get to them that day I put them in plastic overnight. Good luck, I have never turned camphor but people on the forum say it smells nice.


Bill Grumbine Log Cutting

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

#3

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

Ken Oakley-Sunny St. Cloud, Fla.

>Thank you for the info and link. I had visted a website showing Bill turning a bowl but figured it would be easier to ask here then to read his whole article. Camphor,especially green, has a very strong pleasant odor--Very much like a sweet Vicks Vaporub. It sure will clear your sinus. It can almost become addictive. When I want to get rid of some of the smells in my shop I cut some scrap camphor on my bandsaw or sand it on the belt sander. Then I vacuum the sawdust up and everytime I start the vacuum up it blows the smell out the exhaust. And camphor has some of the prettiest grain and coloring and finishes beautifully.

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

#4

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

David Campbell

>Before I started turning, I helped take out a large Camphor here in southern california. I used it in the fire place and gave away pieces "sob" before I saw the light and began to turn. When I went to the shed I found some remaining wood that was several years old and showed almost no checking. In my experience, Camphor seems to be one of the most stable woods for drying with little or no checking (YMMV) even in the heat of our summers. Also very hard to split. It is wonderful to turn.

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

#5

Re: Cutting-Sealing-Camphor Wood Bowl Blanks

Bob Elliott-Casselberry, FL

>Camphor is also very insect resistent.