Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Bugs!

Posts

Bugs!

#1

Bugs!

Scott Hurley

>Help!. Powder post beetles seem to have invaded my pile of to-be-turned wood. (I see several little piles of sawdust under the logs). How do I get rid of the little buggers? I've tried cooking the logs in the oven (200 degrees for an hour), and that seems to work, but a lot of the wood splits. Would soaking the wood in denatured alcohol (a la Dave Smith's method for drying bowls) work? Any other suggestions? My shop is in my basement, and I hate to bring infested wood inside my house. Thanks.

Scott Hurley

Re: Bugs!

#2

Re: Bugs!

Carole in VA

>The alcohol will kill them, but I don't know if it would penetrate a whole log. Aything I see bugs in, I move outside to a "bug pile" which I dust with 5% Sevin and that "seems" to drive them away, but who knows! At least I have not seen anymore little sawdust piles! It's an ongoing battle here in the hot and humid South.

Re: Bugs!

#3

Re: Bugs!

Chris Andrew

>Scott,

According to the Oregon State University Extension Service, freezing the wood at a temperature of 0 degrees fahrenheit (or below) for at lest 48 hours will kill the bugs.

I'll email you an article on Powder Post Beetles (PDF file) that was published by the extension service.

Re: Bugs!

#4

Re: Bugs!

W.C. Turner

>You Rang, OHHH, that's my nickname, I thought you were calling me!! 8^)

The piles of sawdust don't necessarily mean powder post beetles. Most likely they are just wood borers. I had the same concerns last year. Dig some of them out of the wood, usually they're not very deep just under the bark, & take them to your extension service to have them ID'd.

Re: Bugs!

#5

Re: Bugs!

Barry Irby

>There have been a number of posts here over the last few weeks on this topic.

One suggestion was to put the piece of wood in a plastic bag with a small container of gasoline , a couple of ounces, and set it in the sun, with the bag sealed. The warmth will evaporate the gas and it will kill the bugs. Take the wood out and air it out for several days.

There are commercially available chemicals also, Timbor and BoraCare come to mind, but they may leave some sort of residue that is harmful behind. They are based on Borates and Boracare has Glycol in it. Don't know what the effects on you and the finish would be if you try to turn chemically enhanced wood.

In the old days there was Viacane and methyl bromide. Not sure they are still available, but they are gasses and may leave less residue.

Re: Bugs!

#6

Re: Bugs! *LINK*

John K Jordan

>The power post beetles I've seen were mostly in the end grain. You should see tiny holes.

There is a lot of info on the web. The link is to one good site for ID and treatment.

JKJ in East TN


http://www.doyourownpestcontrol.com/powderpostbeetles.htm

Re: Bugs!

#7

Re: Bugs!

Scott Hurley

>Thanks to all for your replies. I think I'll try the gasoline technique. BTW, on some beech logs, they bored right through the wax end sealer... Tough little buggers!

Scott

Re: Bugs!

#8

Re: Bugs!

John K Jordan

>>they bored right through the wax end sealer

I mentioned this a month or two ago, but I had an interesting experience with borers one evening. While working on sealing some maple blanks I left some in a wheelbarrow overnight which collected some rain water, causing a strong maple wood aroma. After drying them a bit and while sealing them the next day I noticed the aroma evidently attracted a swarm of flying beetles. I watched them land and start boring into the blanks, some boring through anchor-sealed ends that were already dry!

A bit of insecticide took care of them but I did notice something interesting. While they went for the maple, they ignored some other kinds of green wood near to the maple. This observation makes me wonder if certain "clans" of beetles prefer or restrict themselves to certain species of wood.

BTW, the little buggers were very fast at boring. In the time it took me to go get the insect spray, some had almost embedded themselves into the wood.

JKJ in East TN