Re: show me your photo booth
RK in Milw
>Go to Photoflex.com and check out their lighting lessons. They have a product called LitePanel which you can easily make. Make the panel frames from 1" pvc electrical conduit and 1" pvc plumbing elbows. PVC electrical conduit works better than pvc plumbing pipe because it has a thicker wall and is therefore more rigidl.
You can buy the Photoflex translucent fabric from B&H Photo for about $15 or make your own from rip stop nylon fabric. One Playboy photographer used white bed sheets. Either way, don't get your light too close or you might start a fire. Move your light back and forth in relationship to your LitePanel to get a softer or harder lite.
In my photo, the Litepanel is on the left side and a white foamcore reflector is on the right side. I used some plexiglas mirror placed to the right rear to produce some highlites on the finial. There is a spotlite on the background. You could modify a spotlight fixture used for track lighting to create a spotlite.
The background is gray Formica curved up in the back. Another easy way to create a back ground is to paint the back side of some cheap vynyl flooring with flat latex paint. Lots of things can be backgrounds such as wood, ceramic floor tile etc. Look at commercial phtography web sites for ideas. Simple and uncluttered works best so as not to detract from the product.
Hope this helps and be sure to play around and have fun. One note of caution, photography is just as addicting as woodturning.
