Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

A little diversion for woodturners

Posts

A little diversion for woodturners

#1

A little diversion for woodturners

Ken Grunke from SW WI

>While googling for info on tops, I discovered that a hard boiled egg, when quickly spun on it's side, will upright itself and continue spinning on end. I'm not a fan of boiled eggs, but happen to be a woodturner who enjoys turning them and have a 3 lb. coffee can full of wooden eggs.

I couldn't spin them fast enough with my fingers, so devised this little doodad to ensure a successful spin rate.

Just a little bowl with a thin stem, and most of the bowl belt-sanded away to leave two points. Mine is hard maple, 2 1/4" long, and about 1" across the points. Too small for a real chicken egg, but the best spinners in my wooden egg collection were the smaller ones--the two pictured here are 1 3/8" and 1" diameter.


img

Re: A little diversion for woodturners

#2

That is Tooo Coool!

Bert Workman

>I know what my project will be for tomorrow's shop time. Thanks for posting such great pics.

Bert

Re: A little diversion for woodturners

#3

Brad Vietje

Re: That is Tooo Coool!

Brad Vietje

>Agreed -- that is pretty cool.

One idea for a little egg spinner -- if you don't have a bulb on the end, it may be easier to spin, or at least easier to spin fast. I certainly find that is true of tops. To get even more speed, an egg-spinning-doodad might be made with a longer stem, say 4" - 5", that can be spun between both hands, basically rolling it real fast between the palms. This is a neat trick for allowing small kids to turn tops who don't have the finger strength/coordination, or for spinning heavier tops (like eggs).

Safe Spinning,

Brad Vietje

Thetford, VT