Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Ever turned Catalpa wood?

Posts

Ever turned Catalpa wood?

#1

Ever turned Catalpa wood?

Thomas Skaggs, Foothills of Mount Level

>I just had a friend offer me some wood from a catalpa tree that is being cut down. Is that a wood of any note in terms of turning or is it nothing to get excited about?

Thanks for any info.

Tommy

Re: Ever turned Catalpa wood?

#2

it can be very pretty

tdaniel

>

Re: Ever turned Catalpa wood?

#3

Steven Antonucci

Once- kind of soft

steve antonucci

>I only turned one bowl, and I gave it away. Wasn't something I'd kill to get more of. Tears easily, not the easiest wood to work.

Steve

Re: Ever turned Catalpa wood?

#4

Re: Ever turned Catalpa wood?

John Lucas

>I made a lot of Christmas ornaments from Catalpa one year. I found that you need to get it as cleas as possible off the gouge our even shear scraping. It gets really lumpy if you sand with anything courser than 220. It's a pretty wood. I like to color it with Annaline dye becase the grain really pops when you do that.

Re: Ever turned Catalpa wood?

#5

Re: Ever turned Catalpa wood?

AnthonyY

>DO NOT let green shavings or wood sit on bare metal for long, you WON'T like the results! Don't ask me how I know!!

Re: Ever turned Catalpa wood?

#6

Re: Ever turned Catalpa wood?

Devo

>Its great for boxes, I "think" I remember hearing it contacts evenly across and along the grain when drying...

Re: Ever turned Catalpa wood?

#7

I think I'll Pass

Thomas Skaggs, Foothills of Mount Level

>Thanks folks.

It's 94 degrees today, I have little room to store any more chunks of wood and my chain saw chains need sharpening. This doesn't sound like it's worth the hassle.

I appreciate the wisdom offered!

Tommy

Re: Ever turned Catalpa wood?

#8

Re: Ever turned Catalpa wood?

Sonja Lemon Sacramento Ca.

>Tommy, here is a little Catalpa bowl I just finished turning (dry). It has a coat of oil on it. I found that using instant glue around the bark inclusion prevented further cracking. I like working with it. Sonja


img

Re: Ever turned Catalpa wood?

#9

Another view 

Sonja Lemon Sacramento Ca.

>


img

Re: Ever turned Catalpa wood?

#10

Re: Another view

Joe Herrmann

>I got some of the wood once and turned a natural-top bowl. I liked it a lot. However, I came into the house and couldn't figure what stunk so bad until I realized it was me. It was the foulest smelling wood imaginable and I gave the rest of it away. I don't know if it was just an aberration with that particular piece of wood or it is true of all of it.

Joe

Re: Ever turned Catalpa wood?

#11

Catalpa

Terry Quiram, Roanoke Illinois

>Tommy

I wish I was closer cause I would take all you cared to give me. I love Catalpa for turning and carving.

Terry

Re: Ever turned Catalpa wood?

#12

Re: I think I'll Pass

Gary Ljostad

>I always take any catalpa I can find.


img

Re: Ever turned Catalpa wood?

#13

Re: Ever turned Catalpa wood?

Jennifer@Indy.USA

>Save me a piece please Tommy.....

thank you :)

Re: Ever turned Catalpa wood?

#14

Be careful

Bart Rhoads

>I cut down a big one once and hauled a big load to our club meeting. Several of the members said they had a bad reaction to it. It hasnt bothered me but you never can tell who it will. Have fun with it

Re: Ever turned Catalpa wood?

#15

Re: Ever turned Catalpa wood? *LINK*

Bill Turpin in WNC mountains

>Catalpa can be very pretty, although a little soft. I cut up two truckloads of it in May, there was no stink. Go to the Mountain Gallery at the attached website. Check out Joe Riggs' and Bob Heltman's offerings during June '05 and July '05. Bob sanded to 220, and then used a mini torch to highlight the winter grain line. Then before sanding, he sealed with shellac, and then sanded from 220 to something finer. He then finished the bowl. This technique prevented the black from discoloring the white areas between the harder winter wood. This makes for a very distinct eye-popping grain.

Bill in WNC mountains


Carolina M. Woodturners

Re: Ever turned Catalpa wood?

#16

Re: Ever turned Catalpa wood?

William Duffield, on the Cohansey

>If you don't want to use it for turning, from what I understand of its properties, it should make decent Adirondack chairs. Since it is light, it would be easy to pick up the chairs and move them around. Since it is rot resistant, it should weather well. Should be real easy to work, too.