Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Vacuum Adapter for Jet 1642

Posts

Vacuum Adapter for Jet 1642

#1

Vacuum Adapter for Jet 1642

Tony Dentino - NJ

>I am considering the rotary adapter from Oneway. Will this work with the 1642? What outfeed size do I ask for when I order the adapter? There is an aluminum cylinder that serves as a handwheel; do I need to remove it to mount the adapter? Sorry to be asking so many questions at once but I just got the lathe and am still in the discovery process.

Thanks,

Tony

Re: Vacuum Adapter for Jet 1642

#2

Re: Vacuum Adapter for Jet 1642

Sean Troy

>What ever your spindle size is. I would guess for that lathe 1 1/4 x 8 and yes the hand wheel has to come off. Don't forget to unscrew the set screw before taking off the hand wheel. Sean

Re: Vacuum Adapter for Jet 1642

#3

Re: Vacuum Adapter for Jet 1642 *LINK*

John U - Charlotte, NC

>You can also consider the EZ Adaptor or home-made version.


Vac. setup

Re: Vacuum Adapter for Jet 1642

#4

No so

Dominic Greco in Richboro, PA

>Sean,

You wrote:

"What ever your spindle size is. I would guess for that lathe 1 1/4 x 8 and yes the hand wheel has to come off. Don't forget to unscrew the set screw before taking off the hand wheel."

You are indeed correct when you say that the headstock has a 1 1/4"-8 thread. But the Jet JWL-1642 "handwheel" (if you want to call it that) is hollow and does not have to be removed in order for a vacuum chuck set up to be used. Take a look at the picture I've attached and you can see my set up.

See ya around,

Dominic


img

Re: Vacuum Adapter for Jet 1642

#5

Looks familiar, Dom.

Al Crandall--NE of Indy--

>

Re: Vacuum Adapter for Jet 1642

#6

It should!

Dominic Greco in Richboro, PA

>

It's based on your design (with a few modifications of my own of course)

See ya around,

Dominic