Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

For turning tool makers-

Posts

For turning tool makers-

#1

Steven Antonucci

For turning tool makers-

steve antonucci

>In my ever expanding quest to make tools that function well AND look good, I've been on a quest for brass ferrules. Yesterday, while searching the plumbing aisle at Lowes, I came across this item, which is labeled "bushing".

It looks way better than a standard 3/4" fitting, and is about 3/16" thick. I will be using this on my small hollowform tools, since the inner diameter appears to be +/- 1/2". It cost about $1, which seemed like a small price to pay for something that looked this good, I didn't need to cut, and had nice finished edges.

Steve


img

Re: For turning tool makers-

#2

Re: For turning tool makers-

David Galloway

>Thanks for the tip. I am on my way.

DAG

Re: For turning tool makers-

#3

Re: For turning tool makers-

John Lucas

>Steve I buy what they call Brass Nipples at the plumbing store. These are thick wall brass pipe that come in lengths from a couple of inches to a foot or more. I cut them to length and then put them in my chuck and true up one end. You can even turn the threaded ends if you don't mind a thinnner wall. They come in sizes from 1/4"ID to 1 1/2" ID.

I'm also real fond of Brass Compression nuts. They are threaded on the inside and hex shaped on the outside. I turn a tenon a little larger than the inside diameter and thread the nut onto the tenon. Then I turn away the hex part. They look really great and won't ever come off even if the wood shrinks. They also sell compression nuts that reduce in size so you get a cone shape on one end. These look really great and I use them for decorative tools such as scratch awls, that I give as gifts.

Re: For turning tool makers-

#4

Re: For turning tool makers- *LINK*

Phil Joines Krum, Tx

>Bronze bushing are actually low speed bearings also called sleeve bearings. They are available in a bunch of sizes. Ask at a local bearing

or machine shop supplier.


MSC bushings

Re: For turning tool makers-

#5

Link didn't work

Phil Joines Krum, Tx

>use "sleeve bearings" in the keeword search and select "cast bronze" as the material.

Re: For turning tool makers-

#6

OT: Bronze Bushings

Tom Colligan, Peoria

>In reference to a post in this thread I wonder if anyone understands another way bronze bushings are used. During a new furnace installation I asked the mechanic about oiling the blower motor. He said they're lubricated for life and use bronze bushings - if I understood him correctly.

How does this work? TIA, Tom.