Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

It's Here! (pics)

Posts

It's Here! (pics)

#1

It's Here! (pics)

Bill Grumbine (Kutztown PA)

>Greetings all

The Vega has landed, and is safely in the shop! I had some minor adventures in getting it there, but isn't that what life is like when acquiring heavy machinery?


Here we see the machine as it arrived. I picked it up at the dock. I would have been able to pick it up yesterday, but someone did not see the big red block printing across the bill of lading that said "LEAVE ON DOCK". So it went for a ride in the country, ostensibly for the purpose of being delivered to my door. However, since they had the wrong name (i.e. half my name) and the wrong road (i.e. half the name of the road) the driver could not find me. This is probably from the same person who did not see the big block printing. Anyway...

I arrived at the dock to discover the see through crate the thing came in. Much to my surprise, it was pristine! There were no scratches, it was right side up, there were no ugly holes from a fork lift being rammed through its heart or anything! This is probably the first time I have ever received anything via common carrier that did not look like it had been dragged behind the truck. The dock supervisor put it on the truck, and off I went. I spent the rest of the day driving around with this lathe in the back of the truck, since all my friends and family have real jobs, and no one was around to help unload it.

Come evening, SWMBO came home, and we recruited the neighbor. We installed the Harbor Freight truck lift, slid the lathe off its skid onto my fingers (OUCH) and then onto the lift. SWMBO did the heavy lifting by pressing the down button. Just as an aside, if you have a pickup truck with a class 3 receiver on the back, you need one of these HF truck lifts. They go on sale for $199.99 or something like that, and shipping is free, or at least it was when I bought mine. It saves a lot of grunt work when it comes to lifting logs, lathes, and other heavy items that could mean a truss in one's future.


Here is a shot of it in its new home in the shop. It is sitting right next to my MM 20 bandsaw, which is right by the door. From the pickup, to the bandsaw, to the Vega, and its done! I need to work on that wall a bit to get some storage over there, and some better insulation, but it is in a great place. There is room all around, and I can move between it and the Poolewood easily (the Poolewood is hidden behind that big slab of maple), and with the Vicmarc mini set up next to the combo machine, I will be able to supervise three students from a swivel chair! Everyone will be able to turn without having to worry about shavings flying from their neighbor.


Here is a closer shot. The cage is going away of course. I may saw most of it off and use the stub end for a wood platform where I can put some tools and a Moffatt light. The tailstock comes off in seconds if I need to put the big table on the combo machine for sawing up sheet goods, and the bandsaw is on wheels if I need to do some long sawing that will not go past the Vega.

I got a plug on the end and turned it on to see it run. It is as quiet as the Poolewood. The digital readout is in frequency rather than rpm, but it is going to be relatively simple math to get the actual speed. If the lathe is shaking, turn the speed down, right? I won't get a chance to turn on it until Thursday or Friday, but I will be sure to report again on it. Overall it looks like a great machine!

Bill

Re: It's Here! (pics)

#2

Re: It's Here! (pics)

JamieDonaldson

>Bill- I think it's a workhorse- that's a mule in some other states! A member of our club has one which I have used, and the only bug I saw was tailstock alignment will wander. This is a machine that needs some better advertising in the marketplace. Report back after a maiden voyage or two.

Re: It's Here! (pics)

#3

Re: It's Here! (pics)

Gerry in Maryland

>Jeez Bill,

Is that concrete under that new lathe? hee hee..

Gerry

Re: It's Here! (pics)

#4

Re: It's Here! (pics)

Terry Merrifield

>Bill,

It looks the same as mine except for the tail stock looks like it extends closer to the head stock. Do you know how close it gets? If it does travel closer do you know if its available as an after market item for the older 2400?

Thanks Terry

ps. I love mine, the only problem is that I only turn big bowls when in my shop now.

Re: It's Here! (pics)

#5

Re: It's Here! (pics)

Mark Kauder, Phenix City, AL

>Yahoo - another one bites the dust.

Bill, they may have changed the controller. My digital readout indicates Motor RPM, and not spindle speed.

Happy turning.

Mark

Re: It's Here! (pics)

#6

Re: It's Here! (pics)

Steve Roxberg

>Very sweet, nice looking lathe.

What is the spindle size and thread on that beast?

Re: It's Here! (pics)

#7

Re: It's Here! (pics)

RonZ

>What is it with lathe manufacturers and packing? This looks like how Vicmarc packs theirs and how I received my 21" bandsaw from Taiwan. Is this lathe made in the USA? It reminds me of my Glock. It won't win a prize for beauty but it excels in funcionality.

Re: It's Here! (pics)

#8

Looking Good Bill

Ron in Drums PA

>Good Luck with it.

Re: It's Here! (pics)

#9

You should have come here to get it!

Thomas Skaggs, Foothills of Mount Level

>Bill,

Congrats on the new beast! Too bad you didn't drive to pick it up. Vegas are made about 35 minutes from me. Oh well, I hope you enjoy your machine...made right here in corn country!

Tommy

Re: It's Here! (pics)

#10

Re: It's Here! (pics)

Jerry-Huntsville, AL

>Congrats on the new lathe Bill. I got mine in May and have been enjoying it ever since. I think it has improved my turning because of the increased stability over my previous lathe (A Supershop--A Shopsmith on steriods).

I was able to off load myself with ramps and chain.



On the floor of the shop.



I got the Vega in May and had to clean out the chips twice and now it is time to clean out again!



Enjoy your new machine.

Jerry

Re: It's Here! (pics)

#11

Enjoy, my friend!

John Trant (Baltimore/DC corridor)

>

Re: It's Here! (pics)

#12

Congrats!

David Propst

>Hey Bill,

It is a lucky day for Vega. Not only did you get what sounds like a great machine, I suspect your endorsement will be noticed at Vega's order desk. You know, here are a few of us out here who respect your opinion on lathes. ;-)

Best Regards My Friend,

David

Re: It's Here! (pics)

#13

Re: It's Here! (pics)

Bill Grumbine (Kutztown PA)

>Howdy everyone

It has been along day away from the shop, and allI got to do was look at it as I put my tools away, but tomorrow, I think that will be remedied!

Jamie, it is a solid beast of a machine, that is for sure. I will be sure to add comments about it as I go along.

Gerry, I had to sweep up enough to get it on solid ground, but you know what the floor under the Poolewood looks like! It won't be long. Besides, I thought it might be bad form to have the floor covered in shavings with the DC in the background.

Terry, I am not sure how close the points will get, although I think it will be closer with my Oneway center and chuck on it. I will measure when I get it going and let you know.

Mark, my controller is a Toshiba just like John's. It goes up to 1800 and is some sort of frequency. I wonder if there is a way to change it to rpm in the magic box? I do know that I won't fiddle with it without the blessing of the folks at Vega though! Doing the math of what rpm I am at is a whole lot better than doing the math of how much it is going to cost me to fix something for messing with it.

Steve, the spindle is 1 1/4" x 8 tpi, just like the Poolewood. The tool rest post is a gigantic 1 1/4" as well! I am going to get a couple of custom rests made up from Randy at monster-wood-tool.com for it, although the one that comes with it looks to be a lot better than most stock rests I have seen.

Ron Z, it is made in the US of A, and you are right, it is not the prettiest lathe on the market. But what it lacks in looks it makes up for in sturdiness and smooth operation. Glock, eh? I looked at them a number of times, but my hand is just a little too big for the slide. Of course, I have lusted after a .44 mag Desert Eagle for years. My friend Joram is going home to Haifa soon. Who knows but he may come to visit you at some point.

Ron S, you will have to come down for a visit, and bring the family. I know Emily would like that too.

Tommy, if I had the time...

Jerry, thanks for the pics, and that is some pile of shavings there. Mine will look like that soon.

John, this is virtually identical to yours, so I know it is going to be fun. I just hope that cat doesn't come around and get its tail stepped on! ;-)

Bill

Re: It's Here! (pics)

#14

Keith Tompkins

Re: Congrats!

Keith Tompkins

>Congrats Bill, be sure to give us a report!!

Re: It's Here! (pics)

#15

Re: It's Here! (pics)

Ken George

>Just visited HF web site and the lift that Bill refers to is on sale for $199.

Re: It's Here! (pics)

#16

Re: Congrats!

Bill Grumbine (Kutztown PA)

>Hi David

Look for an email from me!

Bill

Re: It's Here! (pics)

#17

Re: Congrats!

Bill Grumbine (Kutztown PA)

>Keith, I will be giving a report here soon I hope, but if all goes according to plan, I will have the privilege of reporting to you in person in Albany! All plans for my attendance have been approved on this end.

Bill