Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Powered Respirators

Posts

Powered Respirators

#1

Powered Respirators

Gerry in Maryland

>My Doctor says its time to look into protecting my lungs if I want to keep turning.

Anyone using an AirMate, AirStream, or Airmaster 30 positive pressure respirators?

I’d like to get your comments good and bad about any of these systems.

I’ve tried the Trend and the Triton and didn’t care for either of them.

Thanks,

Gerry

Re: Powered Respirators

#2

Re: Powered Respirators

Bill Grumbine (Kutztown PA)

>Hi Jerry

I have been using my airhelmet since 1997, and I love it. Mine was purchased when Racal was still making them, and went by the catchy name AH-5. I think the current 3M designation is Airstream. I would imagine that you recall what it looks like. If you are in the area, let me know, and you can stop by. The Vega should be here today. I asked them to hold it at the terminal, which they didn't. The guy said they put it on the truck for delivery, but it never showed up. That should make for today's adventure, dealing with a common carrier.

Bill

Re: Powered Respirators

#3

Re: Powered Respirators

Gerry in Maryland

>Thanks Bill,

I couldn't remember the name of the one you had. I like that design, and if I remember correctly, you made up your own replacement battery pack.

Sounds like you've got your hands full today! Hope to see you next week. If I get up to the Martins Creek area I'll give you a call.

Gerry

Re: Powered Respirators

#4

Who sells the 3M airstream?

phil in NJ

>I haven't been able to track down a source for these in the US...

anyone?

Re: Powered Respirators

#5

Re: Powered Respirators *LINK*

George Van in WI

>Jerry, I have the Airstream Bill refers to. I have had it about two months and will not turn or sand dry bowls without it. If i were to i would have my sinus' plug immediately. With it I can stay till the batteries run out (8+ hours) I had no problem getting used to the weight and when it's a problem my glasses do not fog up. Great face protection as a bonus. They ae available from Airware America, I do not know the other suppliers.


Airware America

Re: Powered Respirators

#6

Re: Powered Respirators

Gerry in Maryland

>Thanks Guys,

I think I have it narrowed down to the Airstream. Now do I need the 8cfm AS200 or the 10cfm AS400 from Airware America.

Gerry

Re: Powered Respirators

#7

Re: Powered Respirators

George Van in WI

>I have the 400, I cannot speak for the 200. The 400 runs longer as well as having more airflow however I doubt you will suffocate in the 200! You can always call Air America (800) 328-1792, they are very helpful and know respirators well.

Re: Powered Respirators

#8

Re: Powered Respirators (Way Off Topic)

Russ Fairfield

>Air America. Now there is a familiar name, and one that always brings back unfond memories.

How many reading this message remember AA, and I don't mean American Airlines?? They were the only airline with direct flights from the US into Vientiane in 1961/62. The service was bad and the planes were uncomfortable, but the tickets were free.

Re: Powered Respirators

#9

Re: Powered Respirators (Way Off Topic)

RK in Milw

>Air America was actually a CIA front. I'd tell you more but then I'd Have to kill ya :)