Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Second & Second

Posts

Second & Second

#1

Second & Second

tek-Brunswick, Ohio

>Saturday was a day for coming in second. The turned sculpture I had in the Art Show came in second. Our turning club met Saturday morning. We had a turn & learn project. The project was to make a bowl that would fit inside a 3-inch cube. I made a nice little bowl out of Cherry Burl, 2 5/8” W x 1 5/8” H. I tied for second place. The first place bowl beat us by one vote. Not a bad day, of course I wanted first both places. A little while ago, I wouldn’t even come close to second place. I’m happy with the improvement, but I still have to improve more. My piece did make the postcard that they used for the show. The postcard is a composite of several pieces of art displayed in the show.My piece is in the upper right hand corner.It wasn’t a big show there were eight pieces of sculpture in all. Each category of Art had a First Place and one Honorable Mention.


img

Re: Second & Second

#2

Re: Second & Second

tek-Brunswick, Ohio

>The award.


img

Re: Second & Second

#3

Second Bowl

tek-Brunswick, Ohio

>Here is the bowl that placed second. I think that there were only 5 entries. I did the best I could on it and I'm happy with it.

Tom


img

Re: Second & Second

#4

Keith Tompkins

Re: Second & Second

Keith Tompkins

>Tom, congrats!I hope these are just the beginning...next time, best of show?

Re: Second & Second

#5

Re: Second & Second

tek-Brunswick, Ohio

>Thanks Keith! Best of show is my goal, Yes! Getting my skills to thst point is more important to me than the prize. I don't like to make "Schlock" work. I want to nail the technique and the form. It's not really about the recognition. It's about being able to do top notch work.

Tom

Re: Second & Second

#6

JL

Re: Second Bowl

JL

>Pretty grain. You said it had to fit in a 3" cube? Nice small work!

Re: Second & Second

#7

Re: Second & Second

Ed Kelle

>Congrats on the success. Very nice works. I bet it is more difficult to make a small bowl than a large one. I will have to give that a try soon.

Re: Second & Second

#8

Re: Second & Second

tek-Brunswick, Ohio

>Ed Kelle said; " I bet it is more difficult to make a small bowl than a large one. I will have to give that a try soon. "

I don't know if I'd say it's more difficult. It is more exacting, because of the small scale. It is also more confining to work on the inside. It is much like working on turned box, or Christmas Tree Ornament. On the positive side, there is much less sanding on a small bowl. I think the hardest parts on this bowl were getting rid of all the sanding scratches and tool marks. Making the undercut rim was fun too. My poor photo doesn't show it, but the bowl has a foot about 1/16th of an inch high. I'm going to make some large bowls soon. I have some blanks big enough to make some 12" to 18" diameter bowls.