Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

How Do You Hinge A Round Top

Posts

How Do You Hinge A Round Top

#1

How Do You Hinge A Round Top

Stuart Johnson

>I made this simple footstool a while back and would like to make another with some modification. I want to make it so the top ring is hinged. It can then be "turned" into a combination footstool and sewing basket.

I'm having a problem trying to see how to hinge something round. Any suggestions?

Stuart Johnson

Red Oak, Texas


img

Re: How Do You Hinge A Round Top

#2

Re: How Do You Hinge A Round Top

John in Kerrville TX

>Soss hinged pop into my mind for some reason, and no, I have used them for this purpose.

john

Re: How Do You Hinge A Round Top

#3

Re: How Do You Hinge A Round Top

Rick Allen

>Hi Stewart

Very nice looking stool.

There are six ways that come to mind, They are mostly either silly, change the clean lines or require additional construction which uses up a fair portion of the inside. Making a simple lose lid is the most appealing to me.

There is one that you see from time to time. A hinge in the middle that lets the lid opening a half at a time for two compartments.

Thanks

Richard

Re: How Do You Hinge A Round Top

#4

JL

Re: How Do You Hinge A Round Top

JL

>Nice stool. Why hinge, why not cust leave a fitted top? I vote with Rick if you hinge - split the top and make a bifold hinge (with or without two compartments). I think you would lose the lines if you put a hinge mechanism on the sides. Another alternative is to split the top in another place and put a hinge set there. Think of it as a hinged folding table. My $0.02.

Re: How Do You Hinge A Round Top

#5

Re: How Do You Hinge A Round Top

RevDoug

>Three thoughts come to mind real quick.

1) Make the top ring separate, a short tenon on the bottom that will fit into the base.

2) Make the top ring a bit larger in OD so that you can attatch the lid with non-mortise hinges. Keep them on the same plane and square with each other and they should work wonderfully.

3) Drill a matching hole in both the base and the lid. Glue a dowel into the base, place a nylon washer over the dowel and then the lid (no glue) onto the dowel. You will have a top that will swivel out of the way in either direction.

Turn 'em round

Re: How Do You Hinge A Round Top

#6

Re:Look at the geometry of the rain covers on semi

Al Crandall--NE of Indy--

>Look at the geometry of the rain covers on semi truck vertical exhaust pipes. A more compact, neater looking version of this geometry could be used to your advantage here.

Re: How Do You Hinge A Round Top

#7

Soss hinge

Phil Joines Krum, Tx

>The Soss hinge may not have enough "throw" in the link but wider one with a longer link based on the same desigh should.

Re: How Do You Hinge A Round Top

#8

Thanks For All The Ideas

Stuart Johnson

>I might try to come up with something that swings with maybe a rare earth magnet to hold it in place. My concern is if it being used as a footstool it would be easy to turn over. If the lid can't be fastened in some manner there would be sewing stuff all over.