Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Burning Decorative Rings

Posts

Burning Decorative Rings

#1

Burning Decorative Rings

Jennifer@Indy.USA

>Hey Everybody,

Thought I'd share a neat thing I saw one of the students at Arrowmont using to burn rings around a bowl. He was using one of those sample squares of Formica counter top, the ones that hang on the sample board at Home Depot and Lowes. He held it in the previously cut groove on the rim of the spinning bowl to make the burn. It was so fast and so easy! Burned a clean black line almost instantly. Much easier and safer than a guitar string or other type of wire.

Just thought I'd pass it along :)

Jennifer

Re: Burning Decorative Rings

#2

thanks!

Mike Schwing from Md.

>

Re: Burning Decorative Rings

#3

Re: Burning Decorative Rings

George Van in WI

>Just in time Jennifer, I was just going to mount a wire on dowels, I will try a formica piece instead.

Re: Burning Decorative Rings

#4

Re: Burning Decorative Rings

Brian Hahn in SW Wisconsin

>I tried that recently on a tool handle that I was making. The handle was hickory, about 1 3/4" in diameter. The Formica "melted" and the hickory only got a slight tan. I switched back to stainless steel wire and nearly set off the smoke detector.

The Formica is great for places where you can't use a wire though.

Re: Burning Decorative Rings

#5

Re: Burning Decorative Rings

john Lucas

>Jennifer Hardboard works well also if you need a thicker line. By best friend uses cardboard to burn larger areas. You can get it to go from brown to black using the carboard. It also works great when you've textured a surface to burn the top suface and leave the texture clear. You do have to spin the turning rally fast for this.

Re: Burning Decorative Rings

#6

Dick Hines

Re: Burning Decorative Rings

Dick Hines

>Jennifer, I have been using those sample chips for 2-3 years. I very seldom use wire anymore. When you are through burning the ring you don't have to worry where to put the HOT wire.

I do wish they came in a thiner material though.

Re: Burning Decorative Rings

#7

Re: Burning Decorative Rings

eaglesc

>For pens I have switched to twisted cotton butchers twine.

It doesn't cut into the wood.

It may take bore than one section of string but I don't run the risk of cutting the wood.

I hated making up the handles and occasionally the wire over heated and broke.

With the string no handles are necessary.

I imagine this may be a pain on larger bowls but it does work for pens.

Re: Burning Decorative Rings

#8

If you use different color samples...

Clem Wixted

>... can you get different color rings? :-)

Re: Burning Decorative Rings

#9

Great Idea Jen! Coulda used it last week!

David Propst

>