Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Silver soldering?

Posts

Silver soldering?

#1

Silver soldering?

Spence in Rhode Island

>Anyone know if you can use the flux coated Benzomatic Nickel Silver Brazing Rod for attaching HSS tool bits to Cold rolled steel? I only want to make a couple of tools and so far all the silver solder I find comes in 30' rolls or the like for around $50 plus. Just don't have that kind of money so I'm looking for a cheaper way of doing it. Any ideas or recomaondations?

TIA

Spence

Re: Silver soldering?

#2

Re: Silver soldering? *LINK*

Juergen

>Check Lee Valley they have a silver solder refill kit.


http://www.leevalley.com

Re: Silver soldering?

#3

Re: Silver soldering?

William M. Zerby

>Spence,

I suggest you look up Rio Grande Jeweler's Supply on the web. I found some Staybrite solder (really low temp stuff) that was a kit with flux for a very reasonable price. I have been using this stuff to mount HSS parting tools in a slot in the end of a piece of 3/8" brass rod to make custom carving knives for some carver friends. It may be to "low temp", so call them up and ask about the Hard Solder. This is the stuff jewelers use when making settings. Another possibility is to talk to a local plumber and ask for some silfloss. This is the stuff that they use to make clean-room plumbing connections in copper. It does not require flux to use.

Kindest regards,

Bill Zerby

Re: Silver soldering?

#4

Re: Silver soldering?

Phil Joines Krum, Tx

>Try a local welding supply. A lot of them sell the wire by the foot.

Re: Silver soldering?

#5

Thanks Guys!

Spence in Rhode Island

>Found 46% silver coil and black flux at Welding supply .com for about $20 including shipping. Good deal I think. Thanks again!

Spence