Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Mylands Friction Polish Experiences?

Posts

Mylands Friction Polish Experiences?

#1

Mylands Friction Polish Experiences?

Bill Grumbine (Kutztown PA)

>Greetings all

I saw a bottle of this stuff while I was in the local Woodcraft store recently, and I got to wondering if people were using it, and how their experience with it was working out. For a long time I was a devotee of Behlen's Woodturner's Finish, and used it on many many pens and other small turnings. However, my current bottle has been sitting around for almost eight years, and it is not working like it used to.

I would be interested to hear how the Mylands is working out for those of you using it, as well as hearing about the things on which you are using it.

Bill

Re: Mylands Friction Polish Experiences?

#2

Re: Mylands Friction Polish Experiences?

Steve Roxberg

>I like it on small items, but tried it once on a larger bowl and thought it streaked. Boxes, and pens it's fine.

Re: Mylands Friction Polish Experiences?

#3

Re: Mylands Friction Polish Experiences?

Bill Crommett

>Bill:

I still prefer the Woodturners finish. I have found that the Friction Polish is rather tricky to use and too much gives a build-up. Not as bad as Shellawax, though.

Re: Mylands Friction Polish Experiences?

#4

Re: Mylands Friction Polish Experiences?

Sean Troy

>I think it gives a very nice finish that is easy to apply, as long as the turning is on the small side like Christmas ornaments. Make sure and apply with a paper towel, it's much safer than cloth with the lathe and piece spinning at about 1000 rpm while you apply and burnish. Good luck with it, Sean

Re: Mylands Friction Polish Experiences?

#5

Re: Mylands Friction Polish Experiences?

Bert Smith

>I agree with Steve, works great on small turnings. You can achieve a high gloss by using several coats. Dries very fast, but this makes it very difficult to apply to a larger turning.

Bert

Re: Mylands Friction Polish Experiences?

#6

Re: Mylands Friction Polish Experiences?

Steve Roxberg

>Hey Bill, did you get my e-mail about the chuck?

Re: Mylands Friction Polish Experiences?

#7

Re: Mylands Friction Polish Experiences?

John K Jordan

>I use it constantly on small things such as finger tops and magic wands. I apply it with the lathe stopped, spin against a small piece of cotton cloth dampened with the finish, repeat. If I get streaks, I rub them out with the dampened cloth.

I've also used it off the lathe rubbing by hand.

I believe it's shellac based so the usual shelf life precautions would apply.

JKJ in East TN

Re: Mylands Friction Polish Experiences?

#8

Re: Mylands Friction Polish Experiences?

Jim Shaver - Oakville, Ontario

>Hi Bill,

It's my Go To Finish for turned wood.

Take care,

Jim

Re: Mylands Friction Polish Experiences?

#9

Mostly for small stuff.

Jack Savona

>I use it over CA to add an extra gloss to pens, stoppers, and wands. For all else I use Bush Oil, Watco, and the Beall or just the Beall system by itself.

If I start at a slow speed and keep the terrycloth rag with the Mylands moving as I increase the speed, I can get a streak-free finish. It seems to give a bit more shine than my home-brew.

Jack

Re: Mylands Friction Polish Experiences?

#10

Re: Mylands Friction Polish Experiences?

Barry Turner

>Maybe you need a fresh supply.........

Re: Mylands Friction Polish Experiences?

#11

Re: Mylands Friction Polish Experiences?

Bruce Wiseman

>I've used it on pens and other small stuff for years and I really like it. One small word of advice. After using it let the piece set untouched for a few minutes to let the wax harden. If you touch it while the wax is still warm you can leave finger prints in the finish.

Like some of the others mentioned, it dries too quickly to use on larger pieces.

Re: Mylands Friction Polish Experiences?

#12

Re: Mylands Friction Polish Experiences?

Colin Spencer

>Bill

I use this regularly, like the other posters on small items. I apply it using the circular eye make-up removal pads (the indented side). A small amount on one end of the pad folded in half to apply it then increase the speed and inish off with the other half of the pad without the finish on it to buff. These pads are slightly abrasive and so burnish as well as applying the polish. Two or 3 coats are enough, I have never managed to get a successful finish on anything other than small items with the Mylands. If you can find some original Record 'Speed'n eeze' on your side of the pond this is good for larger items it does not set as fast. Record are now producing a new version of this polish which IMHO is not as good as the original. There was an article in the June issue of the UK 'Woodturning' magazine that did a test of Friction Polishes that may be of interest if you can get a copy.

Colin

Re: Mylands Friction Polish Experiences?

#13

Re: Mylands Friction Polish Experiences?

Bill Grumbine (Kutztown PA)

>Thanks for the replies everyone. I posted this in several places, and have gotten responses across the spectrum. My goal is to find something that is fast and durable for smaller items. I always had (well, almost always had) good results with Behlen's, but I was hoping to avoid shellac becasue of the handling issue. This seems to fit the bill based on comments from those who have used it and found it to work well for them, but I would be concerned about the bottle stoppers I am starting to make. I'll have to think on it some more.

Steve, I got your email, and had responded to it about the same time I posted my question here. It sounds like it never made it, so I will forward it on again.

Bill

Re: Mylands Friction Polish Experiences?

#14

Re: Mylands Friction Polish Experiences?

Dinyar Chavda

>Bill:

Because bottle stoppers have to withstand both alcohol and water, I was advised by John Williams and Russ Fairfield to use superglue---gives you a fast, glossy finish.

Dinyar

Re: Mylands Friction Polish Experiences?

#15

Re: Mylands Friction Polish Experiences?

Tom In Red Deer

>Hi Bill,

I use Shellawax and a home brew (one of Russ's I think)and have great succes with both on smaller items. The secret seems to be in surface preperation. The smoother the better. My final sanding is done with a suoer fine 3m type pad. That acts as a burnisher.

I apply a coat of finish with the lathe off, turning the piece by hand to get a smooth coat. Then, at about 1500 rpm, I use a slightly dampened paper towell to polish. Medium pressure is all that is needed. A good light will allow you to see the gloss appear. When it does, stop.

As mentioned before, the finish is very soft when it is warm. I part the pieces at this point and let them sit for a couple of hours before I cut the nubbins off the bottom.

Tom in Red Deer

Re: Mylands Friction Polish Experiences?

#16

Re: Mylands Friction Polish Experiences?

Jorge Castaneda

>Hi Bill,

I like it better than Behlen's, a lot easier to breathe when you are using it, the finish is not as glossy and I like that too most of the time. I usually use walnut oil first and chase it with the Mylands.

Jorge

Re: Mylands Friction Polish Experiences?

#17

Re: Mylands Friction Polish Experiences?

RonZ

>If you liked Behlen's, Mylands will knock your sox off. It's simply the best friction polish out there. I've tried them all, recently finaly trying the Shellawax. The only caveat is that you have to know how to apply it.

Re: Mylands Friction Polish Experiences?

#18

Re: Mylands Friction Polish Experiences?

RonZ

>I forgot to mention that Mylands FP will also work as a sanding sealer but I prefer using Mylands sanding sealer. I have done up to 8" platters and 4" diameter table legs with Mylands FP.

Re: Mylands Friction Polish Experiences?

#19

Re: Mylands Friction Polish Experiences?

RonZ

>If you use an oily wood like cocobolo you an finish up with a paste bee/carnauba wax. I learned that from Nick Cook. Otherwise I use Mylands melamine finishe as its water and alcohol resistand. It's just as easy to use as the FP and you can add paste wax for a very nice soft finish.

Re: Mylands Friction Polish Experiences?

#20

Re: Mylands Friction Polish Experiences?

James McClure

>You can mix up your own and try it to see how you like it. Just mix boiled linseed oil, shellac (premixed), and alcohol in equal parts. It's practically the same as Mylands and works just as well. The only difference is that you have to shake up the homemade stuff before every application. Mylands has some emulsifiers in it and will stay "shaken" for a little while. Good luck...

Re: Mylands Friction Polish Experiences?

#21

Re: Mylands Friction Polish Experiences?

James McClure

>Mylands cellulose sanding sealer will knock your socks off. That stuff is incredible!

Re: Mylands Friction Polish Experiences?

#22

Re: Mylands Friction Polish Experiences?

eaglesc

>If I don't use a CA finish I use mylands.

3rd choice is deft.