Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

just got a tree

Posts

just got a tree

#1

just got a tree

phil in NJ

>I just got a whole tree of wood for turning, but the bad news is I don't have any anchorseal around.

I'd like to seal it as soon as possible... anyone have suggestions on what to use immediately?

Or should I order up anchorseal and wait the few days for it to arrive?

Thanks!

Re: just got a tree

#2

JL

Re: just got a tree

JL

>Thick latex paint (sort of like the roof or water-sealing type). Less problem (and neater) than roofing cement.

Re: just got a tree

#3

Options...

Jay in TX

>1. JL makes good advice (sp?)

2. Leave the log in whole form and wait for anchorseal or equivalent. Accept losses from end checking.

3. Follow #2 and use latex paint

4. Leave the log in whole form, standing on end, and wait for anchorseal/equivalent. Accept losses from end checking. This works better than than #2, I don't know why. The proof is still sitting in my garage. I cut an osage orange log over a year and a half ago into managable sections. One section was stored vertically, 2 were stored horizontally. The 2 that were "laying in wait" split visibly through the entire length of the logs, massive checking and relegated to the firewood pile. The vertically stored piece has a few small end checks on both ends. This is after a move from Ohio to Texas, being stored in first a garage, then a storage unit for a couple weeks, then my garage here. I can't seem to manage remembering to put anchorseal on it...even to this day. Maybe I'll cut it up this weekend to see what's going on inside. Shouldn't be too far from matching the yellow on *the new Mustard Monster*. If Andy Wright remembers, he can attest to seing the log in question and its physical state when he came to pick-up my former lathe a couple of weeks ago. I almost gave it to him, but seeing as it was the last log from the site my Dad mentioned to me before he passed (he'd see these construction sites while driving around with Mom and let me know he'd talked to the owners about "his boy" always on the lookout for wood, normally entailing an unplanned stop completely to the indignatious understanding of Mom) so I just couldn't see it leaving my possession.

5. Follow #4 and use latex paint/equivalent

Now someone correct me if I'm wrong, but the idea is to bring about equalibrium in moisture loss from end grain and face grain; latex isn't really a good long term solution for this, is it? I've never been in a pinch and had to use the old house paint. Probably good enough for more stable hardwoods, but I don't think I'd trust it for too long with fruitwoods or other known bad actors like Madrona...

Re: just got a tree

#4

Option II

Jim King

>Wrap the cut up blanks in saran wrap or stretch wrap and pock a few holes in the plastic for it to breath but soak a few hours in STRONG chlorine solution to stop mold growth before packaging.

Re: just got a tree

#5

Steven Antonucci

Where in NJ?

steve antonucci

>If you were close by, I got a 5 G bucket. I'm in Byram Twp.

Steve

Re: just got a tree

#6

Re: Where in NJ?

Keith Newton

>I have had good results with white latex primer. I keep my turning logs stored outside, and hose them down every so often. I don't want to dry them in log form.

Re: just got a tree

#7

Re: Where in NJ?

Phil in NJ

>I'm in montclair. if you wanted some gum tree logs (18" - 24" across, 1-2' length) for turing, you could swing by with some anchorseal :)

otherwise I'll try poly or latex paint for now.

Re: just got a tree

#8

Re: just got a tree

Barry Irby

>I've heard you can use Titebond or Elmers glue. Never tried it though.

Re: just got a tree

#9

Re: just got a tree

William Duffield, on the Cohansey

>I have used yellow glue. It works well, in a pinch. It's just a lot more expensive than AnchorSeal, and a lot more difficult to apply. For example, try spraying TiteBond :^) That's probably the most popular method the pros use with AnchorSeal when they are treating thousands of board feet of lumber at a time. For small, specially valuable pieces of turning stock, it is a viable alternative.