Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Revitalizing our Club

Posts

Revitalizing our Club

#1

Revitalizing our Club

Ben Aragon

>Revitalizing our Club

The woodturning club I belong to is slowing down for some reason. You know how it is when 5% do 100% of the work and then you loose a few of them. I know there are a lot of good turners in the club but getting them to participate is a little hard. We meet the first Saturday of the month. This Saturday a relatively new member is giving the demo on Stacey Hager’s Cove tool.

After the demo I plan on giving him a nice bowl blank as a thank you. I would like to present the idea to the club that, Unofficially we should bring a piece of wood to the member giving the demo that month. Also that you don’t have to bring a piece of wood to each meeting unless you want to, but maybe 3 or 4 of the 12 meetings a year. I know I have more wood than I can turn because I stop every time I hear a chainsaw in the neighborhood.

Is this idea too presumptuous, I’m not sure how to present this idea to the club. I don’t want anyone in the club to feel like they have to bring any wood to a meeting to be a member. There are people in the club like myself that have more wood than sense.

At the meeting we have about 40 members show up and if the person giving the demo walked away with 10 or so blanks that would be a nice little haul. It might bring the club a little closer and get a few more to do demos. Maybe make some new friends. One last thing my club does do some workshops, we could do the same thing for the person giving the workshop.

I attend about 10 meetings a year I know I can afford 5 to 10 bowl blanks a year especially for demos I really enjoy.

What do you think? Am I out of line? Is this going to cause problems?

Best Wishes,

Ben

Re: Revitalizing our Club

#2

Re: Revitalizing our Club

Steve Roxberg

>Seems like a good idea to me. The only problem is that the newer turners are generlly the ones who need wood, and they are less likely to do a demo. Hmm,maybe the bribe will get them to do it.

The other trick I've heard is to not ask for volunteers, but the say I like that project you completed so in October your going to show us how you made it. It's much much harder to say no, than it is to sit on your hands if asked to volunteer.

Re: Revitalizing our Club

#3

Re: Revitalizing our Club

Paul in Phoenix

>When we (AZ Woodturners) have member do a demo, we give the turner a $50 honorarium for their time and effort. I know that would be hard for a small club to come up with every month. It would also be nice to come away with an interesting cache of wood. I know when I do a two hour demo, I spend at least that same amount of time, and maybe more, in preperation.

Re: Revitalizing our Club

#4

Revitalizing our Club

Terry Quiram, Roanoke Illinois

>I am a new president this year. A couple of things we did to spark interest again. I have a presidents challenge where I turn something that is new to me and members have 2 months to respond. I have some great Curly Maple that I use as a prize. The winner is chosen by lottery from all that participated. We have a core of 3 people and 2 rotating members that plan activities and suggest new topics. The rotating members are on a 3 month cycle. Some people just will not talk up in a group but get them by themselves and you get some great ideas. We have also asked some of the better finishers to go into exact detail and define the process, procedure and material they use to get the finish they prefer.

Terry

Central Illinois Woodturners

Re: Revitalizing our Club

#5

Re: Revitalizing our Club

tdaniel

>Ben, we are having the same problem. In the beginning most of our members were beginners but now that we are almost 3 years old we have a good number of turners who have progressed to the next level so it is harder to pick demo topics that interest the entire group. we try to alternate between basic topics and more advanced. Even doing this we are not having the percentage of attendance that we had earlier. I was warned by Dick Tuttle when we started our club that the worst thing for a club is when "cliches" form. Unfortunately, that is happening within our club. If we could fire about 3 people our club would be better off. As far as the 5 to 10% that do all the work, I have a suggestion: Do a 2 minute tool tip and/or "Wood of the Month" to begin your meeting and use newer turners as much as possible for this. It is easier to get someone up in front of the group for a 2 minute demo than an hour and a half but once they are accustomed to doing it they can move on to do a longer demo. You must put people to work, otherwise they will just sit back and let others do it all.

TD

Re: Revitalizing our Club

#6

Re: Revitalizing our Club

Russ Fairfield

>I know of a club that actually asked 3 of its members to resign, and it was the better organization for having done that.

Re: Revitalizing our Club

#7

Re: Revitalizing our Club

Gary Evans Tallassee, TN

>The clubs that I have been associated with that are the most vibrant usually have some money to spend on demonstrators. Money can be raised in a number of ways, but a raffle of wood and other donated items brought to each meeting is a way to bring some money into the coffers every month.

Gary

Re: Revitalizing our Club

#8

Re: Revitalizing our Club

Marty Barron - St. John's, Newfoundland, Canada

>Hi Ben,

At our meetings this year a challenge to turn something for next meeting is presented to the members. Bottle Stoppers, weed pots, spinning tops, pens, etc. This has resulted in larger show and tell for the next meeting. As someone else has mentioned instead of giving wood only to the presenter; anyone who has so much wood that they would need to live for a hundred years to use up their wood supply could bring wood in for the other members. Newer members don't have a big supply of wood. An instruction sheet can be given as well so that new turners have a guide of the steps to create the turned challenge item. The challenge has created a little more life in our club meetings.

Hope this helps,

Marty ...

Re: Revitalizing our Club

#9

Re: Revitalizing our Club

John K Jordan

>Ben,

I'm not sure if this is a problem in your case, but the day and time for the meeting might be important. I personally would have a difficult time attending a meeting on a Saturday. There is just too much to do on the weekend to break away. Our club (Smoky Mountain Woodturners) meets on the third Tuesday evening of each month -- just about perfect for me. Perhaps for others as well - lots of people come. Everyone has their own schedule, but for me, Wed, Fri, Sat, and Sun are out and Mon is undesirable. You might discuss this at a meeting and do a telephone poll of those not present.

As Gary Evans mentioned, money helps. One thing they do in our club to raise money: everyone who desires brings a chunk of wood to donate to the cause. Anyone who wants pays $1 for a raffle ticket. Some buy several. Some people go home with great pieces of wood and it's a bit of fun as well. The club adds the money to the till. It is often painless for the person bringing the wood (I brought a bunch of figured maple blanks one night because I had way more than I could use.) Having money allows many more options in hiring or paying demonstrators, catering outings, etc. Our club just voted to purchase video equipment to help with the demos.

Also, each meeting has a show&tell where you bring your latest work and pass it around. I find this interesting and informative.

Two things keep the club going: 1, someone takes photos and publishes a short newsletter each month which arrives just before the meeting. This reminds people of the meeting and generates some interest. 2, someone works hard to locate and schedule demos and events. John Lucas made a long drive to demonstrate skews and mirrors for one meeting. One meeting was a session with Ray Key. One was a summer picnic. Another was a visit to a larger club in an adjoining state. A meeting might be scheduled in the shop of a member. There are periodic solicitations for ideas for demos and events.

JKJ in East TN

Re: Revitalizing our Club

#10

Re: Revitalizing our Club

Ben Aragon

>Great ideas everyone I’ll suggest them.

Getting wood to the new turners is a great idea Steve, I’d like to start that too. Small stuff, nothing expensive but a small cache of wood to get them on their way.

I wanted to get a few of us to give a piece of wood as a gift and a sign of our appreciation for the person taking the time and effort to do a demo. I don’t feel the wood would have to be something extravagant, a small piece of spindle stock, lace wood would make a nice handle. If several people did this a nice assortment of wood would make a great gift and not cost to the club any money. I don’t mind the idea of giving the demonstrator money and we have, for outside turners, artists, and pros.

Maybe I shouldn’t say anything to the club but lead by example and just start bringing wood for the demonstrator as an appreciation and see if others follow along. I don’t mind if I’m the only one to do it, I can give up 12 pieces of wood a year and still live.

I have decided I plan on doing this, I hope a few others will contribute. I might just talk to a few on the side, the ones with all the wood.

I have learned so much from them and the people at this website. I would like to say those of you that get up in front of us all and share your knowledge, “ THANK YOU”!

Is anyone in your club already doing this and how did you get started?

I guess this is an invitation, Will you start bringing a token gift of wood for the demonstrator at your club?

Best Wishes,

Ben

PS thanks for listening.

Re: Revitalizing our Club

#11

Re: Revitalizing our Club

John Lucas

>There are a lot of little things that may help but I think the biggest is a sense of camraderie and fun. Try to get people to know each other, have picnics or outings. Probably our most successful thing is to have hands on turning days. We pick a day and gather all the mini lathes we can and meet somewhere. The more advanced people work with the newbie's preferably with the new person turning. Sometimes we will have a short demo such as how to use the skew or sharpening and we will announce it so all those who want can stop turning and watch the short demo.

When the meetings are fun and informative people want to attend. when we have local turners there's usually a lot of heckling going on. This helps lighten the atmospere. We don't encourage that for outside turners unless it's someone we all know well.

We have a monthly contest. We pick a topic for each month and all who want to enter can. Sometimes There are a lot of pieces and sometimes there aren't but everyone seems to enjoy it.

Re: Revitalizing our Club

#12

Damn Tired of Being President

Jerry Whitaker

>Our club is 7 1/2 years old and I have been president for 6 1/2 years and newsletter editor since day one. The first president moved to another state. We have 45 members and all but about a dozen of us are Winter Texans who are here in South Texas for 3 - 5 months and then go back home. A few of them contribute to the club's existence but the majority of them show up just to have a cheap place to go for entertainment (dues are $18/yr). Several of them are carvers only etc. I am thinking more and more about not only resiging as president and newsletter editor but just quitting the club entirely. I have been referred to many times as the "glue that holds the club together". I know this is meant as a compliment but even glue sometimes looses its hold on things. I have some good friend that I would hate to lose contact with but I am just tired of running the show, doing the newsletter, selling raffle tickets and arranging the demos. Short of resigning and starting a new "Club of One" do any of you have any ideas or suggestions on how to remedy this situation?

Re: Revitalizing our Club

#13

Re: Damn Tired of Being President

John Lucas

>Jerry

You simply have to say it like it is. Tell them You've been president for 6 1/2 years and it's time for someone else to step up. Then you have to be firm about not doing it again. If the club is decent at all someone will step up. Let them know that you will be there to help out but simply don't want to run the show anymore.

Re: Revitalizing our Club

#14

Re: Damn Tired of Being President

Ben Aragon

>Jerry,

I thinks its time you have someone else take over. Our first president had to do the same thing. Someone will take the job and the club will continue. Don’t quit the club, keep going and meeting with friends. Our club has had members get mad and quit and they are deeply missed.

I think you just have to tell them you will no longer be president, newsletter editor, raffle ticket sales, and organizer. At the meeting you have to assign people to these jobs, this would be your last job as president. You would act as mentor to help with the transition. Don’t let the meeting end until people take the positions or temp positions until you have elections.

Email me your address I would like to send you a bowl blank and I mean that.

Best Wishes,

Ben

Re: Revitalizing our Club

#15

Re: Damn Tired of Being President

Ed Moore

>Here is an approach to having someone else be president and take the load off your shoulders. Maybe you need two people or even three to take over your jobs. Ask that a "president-in-training" be selected by the club to work with you for 6 or 7 months and then take over that job. Then, select a computer-oriented person who is literate and ask them to work with you for 6 or 7 months and then become the newsletter editor. Choose someone and ask them to be raffle chair. Then indicate that you are going to step aside and be in charge of "Skill Enhancement" for some period of time and that is all. If the club balks, then tell them that this is your last meeting and you wish them well. Then, you may have their attention and can make some progress. You obviously care about the future of the club. Then care enough to use some "tough love". Behavior is not changed until there is something that encourages a change. That something can be positive motivation or it can be trauma in some form with unpleasant consequences.

As president, it is your duty to appoint and select personnel for different tasks. If you do all the work then you are not being a good president. A good president grooms a successor who can "take the ball and run" when the time comes for a change.

Re: Revitalizing our Club

#16

Re: Revitalizing our Club

Ben Aragon

>John,

I don’t want to sound like I’m complaining about the club I’m a member of. We have allot of participation and jovial camaraderie. With the artists in the club we need to step up the level demos so the level of work as a group grows and the long time turners don’t get bored and quit. I understand we need entry level stuff for the beginners too. We have a great group of Guys and Dolls and with anything, interest goes in cycles up and down.

Back ground on our club:

Established around 1980

Members 120, around 40 show up on and off

President, Vice President, Video person, Newsletter editor, Raffle person, Green wood person, etc…

Monthly: Meetings, Raffles, Newsletter

Occasional work shop

Loaner lathes for new people

Mentors to work with beginners

The club is really doing ok. I’d just like to give the club a little boost. I’d like to say thank you to the demonstrators in my own way and get a few more to show off what they can do.

Who has the best club and what are you guys doing?

Thanks,

Ben

Re: Revitalizing our Club

#17

Re: Revitalizing our Club

Ed Moore

>Ben,

I'm the program director for Smith Mountain Lake Woodturners, a club that is about 16 months old and has 40 members. You asked about doing something special for demonstrators. After Binh Pho was here I took a picture of one of his pieces that he supplied electronically and had the picture put on a stainless steel travel mug. We got three mugs, one for Binh, one that we raffled off, and I got one for myself (at my expense).

I'm considering getting two mugs with pictures of Bob Rosand and Mark St Leger, the Dueling Duo, who just did a joint demo for us. Bob is left-handed so he will always see Mark's picture, and Mark will always see Bob's. ;>)

Consider doing something similar for the next two or three demonstrators. I will try and get you the name of the mug company, but I'm about to go out of town and the info was on an old computer.

Re: Revitalizing our Club

#18

Re: Revitalizing our Club(Mug company)

Ed Moore

>I got the mugs from Zephyr Print, 866-832-6565. Their website is http://www.zprint.cc/ .

They were very cooperative.

Ed

Re: Revitalizing our Club

#19

Re: Revitalizing our Club

Tom Reiman

>Ben and All who have responded:

This has been a great thread to review. It brings up many issues and there are some great ideas presented. As a member of AAW Best Practices committee I think a number of these could be written up to help others in the future. If you are unaware of the Best Practices committee, and our work, please visit http://www.woodturner.org/community/chapters/practices/ The purpose is to show successful ideas that other clubs have used.

I am the President of our club, Northwest Woodturners, and have been a member for only 2-1/2 years. Last year I was the Vice President and program coordinator. This position is to establish the upcoming events for the next year, but it also grooms the next President. Our unstated policy is that we want new blood every two years. This keeps fresh ideas coming in. We have approximately 65 members and our officers include: President, Vice President, Treasure, Librarian, Newsletter Editor, and a 5 member Board of Directors. When a new President is elected the old President automatically becomes a member of the board. This helps with the continuity of the organization.

We also use raffles to help raise money on a monthly basis, and have a wood auction (last night) that really brings in money. For the auction we ask members to donate some of their excess wood, tools, or projects. We also ask our local tool companies (Rockler, Woodcraft Supply, Woodcrafters, and Gilmers) to provide us with some donated items.

Each meeting has a club challenge that is established at the start of the year so people have plenty of time to prepare. Challenges include things like: Miniatures, Kaleidascope, Pens, Mallets, Segmented, Platters, and Treen. We have two categories: New Turners, and Experienced Turners, and offer a Gift Certificate to the "winner" of each category. The $15 gift certificates that we hand out are donated by Craft Supplies.

I try to get other people involved in each meeting. I ask a different member each month to do the club challenge. This gets others involved, and keeps the program interesting.

Hope these ideas help.

Tom Reiman

Re: Revitalizing our Club

#20

Re: Revitalizing our Club

woodspinner/ Bill Hale

>Ben

I think all of the responces are great. One thing to consider is that it is easier for your members to laugh and say you have done a great job so you just continue. The only problem here lies in the fact that you run out of ideas and also lose the fire of a new president. People will not just step up and say let me do it. You need to look at all of these posts and form a plan to step down. I believe you need to go to the next meeting and tell your people it is time you step down. Establish positions you think are needed and select people you think could and would do specific jobs. Ask them, in the meeting, for help and if they say no select another until you fill the position. Let them know you will help them. Posibly set re elections for 6 months so they feel they are not in for to long.

Set Max times for re election by position.

Many people, and I am one, will not take presidency of any organization but will fill other positions.

Goof luck and good safe turning

Bill in Casa Grande, AZ.

Re: Revitalizing our Club

#21

Re: Damn Tired of Being President

Jerry Whitaker

>Thanks, all for your advice and encouragement. I have assigned a program directors, a raffle team and etc. but they never seem to follow through. When I ask the program director what he has for the next months demo....he says that he cannot find anyone to do one, so I guess we will have a watermelon party. Se we have watermelon and I step in and do a demo. Guess I just gotta get tougher. After posting this problem, I thought that it might be a good idea to just not show up for one meeting without any notice and see what the fall-out is.

Re: Revitalizing our Club

#22

Re: Damn Tired of Being President

Russ Fairfield

>This is not a club. It is a one man band, and you have an audience.

You have 2 choices.

Choice 1-

Keep doing what you are doing, and quit complaining about it.

Choice 2-

Quit. If the rest of them want the club to continue, they will figure it out. Be prepared to discover that you were not indespensible.

Re: Revitalizing our Club

#23

Re: Damn Tired of Being President

Jerry Whitaker

>You are right Russ. Being in the limelight for the first couple of years was great but it has been downhill personally since then. It has really become an albatross around my neck and 90% of the fun is gone. Even when I delagate things to other people, they do not carry through so I pick up where they left off and they know that I will so there is no incentive for them to perform. Unlike some people, I never get myself into anything that I will not be dedicated to. This is good in a way but in this situation, things have turned out bad. I will make some kind of decision in the near future. Elections are usually held in February so I have a little time to plot and plan and get some action or reaction from other people. I will post the outcome sometime later on this forum.