Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Stopping Mold

Posts

Stopping Mold

#1

Stopping Mold

Ken George

>I need help. I have 4 roughed pine bowls that are molding. They have been soaked in a bleach solution twice now. Once in a solution of bleach, 1/2 cup of bleach to 2 gallons of water, for about an hour. The second time in a stronger solution, 1 cup to 2 gallons for about 3 hours. They are molding again.

Can someone please let me know how to stop this molding?

Thanks,

Ken

Re: Stopping Mold

#2

Re: Stopping Mold

Jay in TX

>Turn those blanks! Mold requires moisture, turning them to finish or at least roughing them out will help. Pine (of the varieties I've tried) blue stains (molds) readily right after cutting. Getting the moisture content of the wood down is critical to keeping the mold at bay. Once the moisture is out, then you can work on the mold staining already present with bleaching solutions. Personaly, I don't turn pine anymore, but I might given the opportunity with Norfolk Island Pine. Cleaning pitch of my tools, lathe, body, etc. is just not worth my efforts...I hope your expereinces are much better.

Re: Stopping Mold

#3

Duh!

Jay in TX

>Finish turn them... as they are already roughed...Duh!

Re: Stopping Mold

#4

Re: Stopping Mold

Brian Hahn in SW Wisconsin

>Try soaking it in denatured alcohol. That kills almost everything.

Alternatively, coat the rough-outs with shellac. I've had really good luck with this. The alcohol in the shellac sterilizes the surface and the shellac coat keeps new stuff from infesting the surface. It also helps to reduce checking but it takes several coats to be as effective as wax.

Re: Stopping Mold

#5

Re: Stopping Mold

Keith Newton

>I would not soak them in the solution. Just a light misting should kill the mold on the surface. Once the MC gets low enough it can't grow.

Are you storing them in a dry atmosphere?

Re: Stopping Mold

#6

Re: Stopping Mold

Ken George

>They are sitting in my garage. Not the driest environment but this time of year there are no dry spots. I run the AC in the garage when I am working so it is drier than outside.

What bleach concentration would you use to spray them? It may be another few weeks before I can get to turning them.

Thanks for your help.

Re: Stopping Mold

#7

Re: Stopping Mold

Gary Evans Tallassee, TN

>Ken,

You can stop the mold by providing more air circulation, but you'll need to monitor the wood carefully to avoid cracking. In other words, you are trying to get the surface dry, but not at a rate which will create stresses greater than the wood can tolerate.

Gary