We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I have been playing with pine needles again. I have 2 long needle pines on my lot and just can't stand to waste the needles. The bowl is 8 1/2"D X 3" H. # coats of Watco and buffed before the needles were installed.
>Keep playing! Doing things like this is how you will find your own voice in this sport. Some work, some don't. Eventually you do enough of both to recognize the difference. I'm very glad to see you doing different sorts of things Dick. Very nice to see people using their imaginations.
>Wow! I didn't know there were any others playing with pine needles and woodturning. Personally, I think it is a great combination. I know there are those who don't like it, but I say keep at it. Here is a photo of one that I recently completed. It's my biggest combination to date. Turned from Apple (I think), 11" wide, 7" high.
>Earl- this is a very interesting piece, but my weaving partner/ wife wants to know which came first- turning or pine needle basket? The inside is apparently supported by the turning but not attached?
>Here is another version my wife made out of a bowl which lost it's bark. She has used a number of other materials like wool yarn, woven seagrass, and several decorative twisted or braided mixed threads.
>As I mentioned to Dick, glad to see there are others combining these mediums. I think it's a great marriage. In my case, they both came at the same time. I planned the bowl and coiling as one. The coiling is attached to the bowl...that is the only way I could coil around the uneven edge due to warping of the turning.
>After re-reading your question...I did do the turning first, let it dry and warp and then shaped the coiling to the bowl. When I got near the top I attached the coiling to the bowl so I could go over the top.