Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Wolverine Precision Balancing System *LINK*

Posts

Wolverine Precision Balancing System *LINK*

#1

Wolverine Precision Balancing System *LINK*

Steven Roxberg

>I thought that folks may like to hear my experience with this product.

I purchased it at the AAW show (stealth gloat) in Kansas City two weeks ago. I was prompted to purchase it because my Woodcraft slow speed grinder has always had really bad vibration.

I had replaced both wheels, spent time rotating the washers to get the wheels in balance and it just never really worked. I had actually considered replacing the grinder at one point it was so bad.

So at the show they agreed to let me purchase and try the balancing system and if I wasn't happy return it for a full refund.

The directions are a little lacking, but I was able to figure everything out. You basically replace the hub and washers on the grinder. It did not increase the thickness of the wheels.

I was able to get both wheels 100% balanced and was able to rotate them to any stopping point on the wheel and it just sat there. When I started the wheels would immediately start to turn identifying the heavy edge.

Well the grinder is awesome, it is so smooth and the edges I'm getting on my tools are the best I've ever acheived.

It wasn't cheap, but then a whole lot cheaper than buying a new grinder.

My grinder was so bad that the difference is night and day. Your mileage may vary, but I highly recommend this product.

Let me know if anyone would like additional information.


Balancing System

Re: Wolverine Precision Balancing System *LINK*

#2

Re: Wolverine Precision Balancing System

David Barnett - Venice, FL

>I've had the earliest model for about a decade, I suppose, and like you, I love the thing. Even my 7" Baldor will vibrate somewhat with unbalanced wheels, but with the the Wolverine kit it runs so smoothly and freewheels so long after cutting the power I draw Sharpie marks on the wheels to avoid accidents. As for expense, they're worth every penny and then some -- makes both the tools and the wheels last significantly longer.

Re: Wolverine Precision Balancing System *LINK*

#3

Re: Wolverine Precision Balancing System

Jim Shaver, Oakville Ontario

>Hi Steven,

I am on side with you regarding this product as well. I installed one on my grinder and was amazed at how smooth it became! I later put one on a friends grinder and they too could not believe the change in the grinders operation..it was a blind faith buy intially for me, but I now know it's a super addition and makes sharpening so much more efficient.

Take care,

Jim

Re: Wolverine Precision Balancing System *LINK*

#4

Re: Wolverine Precision Balancing System

Ed Kelle

>Thanks Steven. I've got the same vibration issues with my 8" slow speed grinder. I already sent one back to woodcraft and the replacement didn't seem any better. I had even tried a better wheel but still the same issues. I love my Wolverine system but it would be sooo much better if I balanced the wheels.

I admit to being a bit too lazy to go down to the shop here, but do you recall which size system to buy for this grinder?

Thanks!

Re: Wolverine Precision Balancing System *LINK*

#5

Re: Wolverine Precision Balancing System

Steven Roxberg

>Ed,

Mine is the older Woodcraft slow speed that was blue and came with grey wheels. The arbor shaft on mine was 5/8" which was required knowledge before ordering.

Your wheels must also have 1" center hole. Throwing away the two part red plastic fillers probably helped my ballance as much as anything.

If you've had problems it is money well spent.

Re: Wolverine Precision Balancing System *LINK*

#6

Works even better...

Peter Teubel

>...on high speed grinders. Lets you grind faster without fear of the tool getting out of control on the wheel. I've had the system on both my grinders for a couple years and many wheel. A very worthwhile investment, to say the least.

Re: Wolverine Precision Balancing System *LINK*

#7

Thanks!

Ed Kelle

>

Re: Wolverine Precision Balancing System *LINK*

#8

Woodcraft Grinder

Devon Palmer

>Both my father and I have the woodcraft slowspeed grinders and they BOTH vibrate horribly (to the point we can barely get a good edge). While trueing with a Wolverine dresser helped a great deal, it was still pretty bad. The wheels "wobble" as if the shaft is bent. When looking at the wheel straight on (from the front of the grinder), the side edge moves to the left/right as much as a 1/16th-1/8th of an inch - on both wheels.

Upon closer examination, I noticed that the hold down plates on either side of the wheel don't seem to be ground "true". I was able to minimize the vibration by turning the wheels and hold down plates 180 degrees out of sync so the wobble from each side cancels the other out. but, I'm wondering if you can buy replacement (or better) plates for holding the wheels on the shaft? I think that would completely eliminate the vibration/wobble problem.

If I would have caught it early enough, I would have returned it, but, have too much time invested in it now to take it back...

Re: Wolverine Precision Balancing System *LINK*

#9

Re: Woodcraft Grinder

Steven Roxberg

>That is exactly what mine was doing. I even took the washers off and tried to true them up on granite with sandpaper. Rotated the heck out of them and still had the problem.

Buy the balancing system. It does provide new washers and you can throw the old ones away. Your wheels are also out of balance and even if they ran true you would still have some vibration.

They are not cheap, I debated for over a year. I don't work for them, just a happy client.

Woodcraft now sells them, so with their guarantee you really have nothing to lose.

Re: Wolverine Precision Balancing System *LINK*

#10

Yes

tdaniel

>The One-way balancing kit includes a set of plates that are machined true and fit the shaft tightly. Most of the time the low speed grinders will perform well just by adding these plates. For the 3600 rpm grinders taking the time to balance the wheels will help a lot to improve the performance of the grinder. The Delta 1800 rpm grinder (rumored to be soon discontinued) comes with a properly machined set of plates that do not need replacing. Pay a little more for the grinder and save $50 on a balancing kit.

Re: Wolverine Precision Balancing System *LINK*

#11

Re: Wolverine Precision Balancing System

Rick Duncan

>OK, everyone convinced me I need one. Now the question.....are there any "deals" on the system? I'm almost convinced anything "wolverine" is MSRP regardless of the vendor.

Re: Wolverine Precision Balancing System *LINK*

#12

Re: Wolverine Precision Balancing System

tdaniel

>Rick, I got mine last year at the AAW show in Orlando. I think it was $50 at the show.

Re: Wolverine Precision Balancing System *LINK*

#13

Re: Wolverine Precision Balancing System

Steven Roxberg

>I got mine at the AAW show for 10% off. Call Oneway and ask them if they can still honor that deal, they may well ship it to you.

I also just received a coupon in the mail from woodcraft that is a single use $15 dollars off of a $50 dollar puchase. Contact Woodcraft and say your friend got one, and you wonder how you could get one as well.

Good luck, but I'm still very happy with mine.

Re: Wolverine Precision Balancing System *LINK*

#14

Re: Wolverine Precision Balancing System

Stuart Johnson

>I also just received a coupon in the mail from woodcraft that is a single use $15 dollars off of a $50 dollar puchase. Contact Woodcraft and say your friend got one, and you wonder how you could get one as well.

The coupon I received shows a catalog/internet coupon code: 99100. You can probably use that code and order it without the actual coupon.

Re: Wolverine Precision Balancing System *LINK*

#15

Which System.....

W.C. Turner

>does that grinder require, the 1/2", 5/8", or 3/4"?

Re: Wolverine Precision Balancing System *LINK*

#16

sale flyer

W.C. Turner

>I just saw the wolverine balancing system, in the recent woodcraft sale flyer(good thru 8/31/05). It states that, "wheels must have a 1" thruhole & the grinder must have a 5/8" shaft". Appears they don't offer the 1/2" or 3/4" option?

Re: Wolverine Precision Balancing System *LINK*

#17

Re: Which System.....

Steve Roxberg

>My Woodcraft grinder uses the 5/8" size.

Re: Wolverine Precision Balancing System *LINK*

#18

expiration

W.C. Turner

>when does the $15 coupon expire? thanks.

Re: Wolverine Precision Balancing System *LINK*

#19

Re: expiration....8/31/05

Stuart Johnson

>

Re: Wolverine Precision Balancing System *LINK*

#20

Re: May not work with Woodcraft grinders

Eric Kuehne

>After all the endorsements I succombed and ordered a set from Woodcraft. I called first to make sure that it would work on my grinder as I was at work and whoever I spoke to immediately responded, "No problem". So away I went.

Rant on.

Well I'm here to tell you that there is a problem. I purchased my grinder (their house brand slow speed 8" version) and maybe things have changed but, while the shaft is 5/8" diameter the wheels have bonded bushings with an OD of 7/8" not the 1" required. This was not even close. I think that their current wheels might work but you should check before you order.

So I called them this morning and they basically said, bummer, we'll give you a to ship it back at our expense. Big deal. I apparently have no way of using this system until I replace my wheels. This rant wouldn't be on if the person I spoke to in the first place had given me the correct information. Let's just say that I'm little less than pleased with Woodcraft at this point.

Rant off.

Thanks for reading. I hope that this saves someone a repeat of my experience.

Eric

Re: Wolverine Precision Balancing System *LINK*

#21

Re: May not work with Woodcraft grinders

Gerald McGrantham

>Well, welcome me to the same club. I received a Woodcraft low speed grinder, Wolverine sharpening system and wheel balancer on Saturday. I discovered the same thing. I should have asked here before I jumped, my bad. Guess I'll order a set of wheels. I can't blame Woodcraft for that.

Regards,

Gerald

Re: Wolverine Precision Balancing System *LINK*

#22

Re: Wolverine Precision Balancing System

Tim Grenville-Cleave

>MSRP??

Tim

Re: Wolverine Precision Balancing System *LINK*

#23

Manufacturer's suggested retail price

John Trant (Baltimore/DC corridor)

>

Re: Wolverine Precision Balancing System *LINK*

#24

Re: May not work with Woodcraft grinders

Rick Allen

>But woodcraft will happly replace the part which doesn't fit for you, the balancing system. There uis a satisfaction guarente of one year on everything they sell. Just let them know. I am sure they want to do what they can to make it right for you.

Re: Wolverine Precision Balancing System *LINK*

#25

Re: May not work with Woodcraft grinders

W.C. Turner

>Eric,

Just checked my woodcraft grinder. Just like yours, 5/8" dia. shaft, & 7/8" dia. hole, not the required 1".