Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Jet Mini Lathe Stand size

Posts

Jet Mini Lathe Stand size

#1

Jet Mini Lathe Stand size

Brian Hahn in SW Wisconsin

>Could someone please tell me what the dimensions of the stand for the Jet mini lathe are.

The WMH/Jet web site was no help and the various distributors didn't say either.

Thanks in advance,

Brian Hahn

Re: Jet Mini Lathe Stand size

#2

Re: Jet Mini Lathe Stand size

woodspinner/ Bill Hale

>I put mine on a roll around mechanic tool box with drawers.

Be sure to get one that puts the lathe at the correct height.

I keep all of my small tools, chucks and pen stuff in the chest.

I cut a piece of plywood to fit in the top and just set the lathe on top.

Good turning and be safe.

Bill in Dolores, CO.

Re: Jet Mini Lathe Stand size

#3

Re: Jet Mini Lathe Stand size

Ed Moore

>Brian,

The top of the stand is two plates that are each 4 x 7 1/2". The distance between outside edges is 25". The bolt holes on the lathe are 6 3/8" F-B, and 23 3/8" S-S.

The 2 x 2" posts are 22" C-C, and the splayed bottoms will fit in a rectangle that is 24 1/4 x 33 1/2".

I chose to put a piece of 3/4" ash between the lathe and stand. It is 10 1/2 x 28". The excess width is in the back and I put a Moffatt lamp on a pivot arm with a radius swing of 14 1/2". I secure the lathe to the top and stand with bolts and wingnuts for easy disassembly.

Somebody forgot to measure the height when he went up to the shop to get the measurements. Anyway, the adjustment on the legs is pretty good.

Re: Jet Mini Lathe Stand size

#4

Thanks!

Brian Hahn in SW Wisconsin

>Thanks Ed!

I'm building my own stand out of oak and wanted to know how wide to make the base for stability.

Brian

Re: Jet Mini Lathe Stand size

#5

Re: topic hi-jack

Carol Reed, the Router Lady, Dubuque

>Where are you in SW Wisc? Do you accept shop visitors?

Carol, who is suffering from sawdust withdrawal

Re: Jet Mini Lathe Stand size

#6

Re: topic hi-jack

Brian Hahn in SW Wisconsin

>I'm near Avoca, which is about half way between Muscoda and Lone Rock along the Wisconsin River. That's about 80-90 minutes from Dubuque, depending on route, construction and who's driving.

Shop visitors are welcome, if you don't mind the mess ;) You can send me an e-mail.