Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Free Sample for Clubs

Posts

Free Sample for Clubs

#1

Free Sample for Clubs

Ruth Niles

>Hi,

I'd like to send a free sample of my stainless steel stopper to turning clubs, it would stay with the club so members could see and compare design and quality with whatever they're using now. Going through the AAW Resource book doesn't help much because not all clubs have any members who turn stoppers. If you belong to a club where there are a few turners who do turn bottle stoppers, would you let me know. Please email me directly so we don't take up too much room here on the messageboard.

Thanks for any help.

Ruth

Re: Free Sample for Clubs

#2

Re: Free Sample for Clubs

William Duffield, on the Cohansey

>Ruth, I sent you an e-mail, but Yahoo mail bounced it, with a 451 SMTP error code. Is there an alternate method I can use reach you, without wasting WC bandwidth?

Re: Free Sample for Clubs

#3

Re: Free Sample for Clubs

CapeMayMike

>Hi Ruth,

Are your stopper cones threaded?

Thanks,

Mike

Re: Free Sample for Clubs

#4

Re: Free Sample for Clubs

Frank Martin

>Ruth,

thanks for the offer. I'll email you separately with mailing info. I saw your earlier posts on this topic and am looking forward to seeing the end result.

frank

Re: Free Sample for Clubs

#5

Re: Free Sample for Clubs

Ruth Niles

>Mike,

No the tenon is not threaded. It's sized a tiny bit smaller than the 3/8" and 9mm stated diameters to allow for a few drops of adhesive.

Ruth

Re: Free Sample for Clubs

#6

Re: Free Sample for Clubs

Steve Mushinski

>Email has been sent. I can help you out on some of the Canadian Market.

Steve