USPS
Jim King
>Can anyone enlighten me on the low cost USPS rates for shipping wood blanks ?
Knowledge You Can Build On — Est. 1998
USPS
Jim King
>Can anyone enlighten me on the low cost USPS rates for shipping wood blanks ?
Flat Rate Mailing
Clem Wixted
>Jim,
The USPS has 2 box sizes that mail Priority Mail for $7.70 (it might be $7.50).
Box 0-FRB1 has inside dimensions of 11" X 8-1/2" X 5-1/2"
Box 0-FRB2 has inside dimensions of11-7/8 X 3-3/8" X 13-5/8"
The USPS provides the boxes and if you go to their web site you can order them in lots of 25, delivered free by the USPS. Details for this service is explained on their site. Some Post Office personnel are unaware of this.
Clem
Re: Flat Rate Mailing
Jim King
>Thank you very much. Any other low cost delivery services available up there ?¿ Jim
Re: USPS
Mike Schwing from Md.
>Jim, I do not know about the shipping, but I can tell you that that Black Paschaca you sent to me is the wildest looking blank I have ever seen in my life! I should be able to make several weird little things from that blank and I will return one of them to you.
You are way too kind for sending me that blank. I will do my best with it.
By the way, I ran into Rocky at the KC trade show, he said to say "Hi"
Re: Flat Rate Mailing
Bill D
>I had some basswood logs mailed to me a couple years ago that was sent
3rd class. just put the address on the wood with a marker.as long as it didn't total more than 70 inches it was fine.looked dumb taking them out of the post office tho.
Re: USPS
Jim King
>Mike: I hope no real bugs crawled out of it, I did not have time to treat it much before the person got on the plane with it. Have fun.
Re: USPS
Barry Irby
>Jim, You don't have to take those dimensions of those USPS boxes too literally. If you can shove it in the box, no matter how badly you mangle the box, they will ship it for the same fee.
Re: Flat Rate Mailing
Stuart Johnson
>Another option is the $3.85 flat rate envelope. There is also a priority mail box that is 1-1/2" x 5" x 8-1/2". The will actually fit inside the flat rate envelope. It takes a bit of shaping on the envelope but it works. Some postoffices have raised a stink about the envelope distortion but have lost that battle when pressed.
Re: USPS
Gary Evans Tallassee, TN
>Jim,
The flat rate boxes as mentioned are probably the cheapest way to ship single pieces of wood to anywhere in the Continental US. Outside of that program, the cost increases, based on the weight and the distance between zip codes.
I have gotten decent rates from both USPS parcel post and Fed-Ex ground on pieces that were too big to put in the flat-rate boxes. It has been a few months since the last time I used either service, but I am thinking the cost was around $.30 to .40 per pound to most locations East of the Mississippi. I'm in TN, which is about as central to the Eastern US as you can get. One of the good things about parcel post, as has already been mentioned is that you can just tape a label to the wood and send it without packaging.
Gary