Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Jet Mini - EVS or Non - EVS?

Posts

Jet Mini - EVS or Non - EVS?

#1

Jet Mini - EVS or Non - EVS?

Wendell @ Murphy, TX

>I have a friend interested in getting started with turning. He is looking at the Jet mini lathes. From everything I've read, this is a good starting lathe. Is worth spending $100 more to get the electronic variable speed control?

Wendell

Re: Jet Mini - EVS or Non - EVS?

#2

Re: Jet Mini - EVS or Non - EVS?

John Trant (Baltimore/DC corridor)

>In my opinion, it makes less of an impact early in the learning curve (i.e., you set it to a speed and dont change it for weeks) but VS becomes worth every penny later on when you attempt more complicated projects where major and minor changes in speed are required. It costs more than $100 to add it later on so it is cheaper to pay up on the front end.

John

Re: Jet Mini - EVS or Non - EVS?

#3

Re: Jet Mini - EVS or Non - EVS?

John Lucas

>On my big lathes the Variable speed is worth it's weight in gold but on the mini lathe you loose too much power with the Variable speed model. On smaller turnings this isn't a big deal but on 6 and 8 inch bowls you really notice the loss of power. I would spend the extra 100 on a getting set up with a sharpening system.

Re: Jet Mini - EVS or Non - EVS?

#4

Re: Jet Mini - EVS or Non - EVS?

Carole in VA

>No. Put the money towards sharpening, tools, a chuck, or a fund for the inevitable "upgrade" lathe. My Mini is not VS and it's no big deal. It would be on a larger lathe, though.

Re: Jet Mini - EVS or Non - EVS?

#5

Re: Jet Mini - EVS or Non - EVS?

Ed Davidson

>Wendell,

I've owned both JET Mini models. If this were my only lathe, I'd go with the standard/cheaper version, unless I were only going to turn small things like pens and bottle stoppers...the EVS model will bog down with aggressive turning on larger (greater than 4" diameter) pieces.

If I have or plan on having a larger lathe for the bigger stuff, the variable speed JET would be the only other lathe I'd own.

best regards,

Ed D.

Re: Jet Mini - EVS or Non - EVS?

#6

George Balock

Re: Jet Mini - EVS or Non - EVS?

George Balock

>I agree with John. On smaller turnings you can laeve the speed relatively high with nary a problem. Ray Key says tha under 4" 2000 rpm is okay. As you get up to larger pieces, the variable speed is unbelieveably important. I can't imagine trying to sand a 14" platter with it running at 500 rpm. At that speed, the edge of the platter is going about 20 MPH. Save the 100 bucks and buy some good tools.

George

Re: Jet Mini - EVS or Non - EVS?

#7

Re: Jet Mini - EVS or Non - EVS?

Craig Daymon

>I'm doing all my turning on a Jet Mini NON-VS right now. I have turned bowls over 9" (not much over) without any real problem. The turners group I belong to has several memebers with more than one mini (quite a few teach) and they are very strongly against the VS model because they say it doesn't have the power. Every time I bring one of my 8"+ bowls to the meeting, someone tells me that I never would have turned it on a VS model.

Save your money for the big lathe that you'll be wanting next year. It's pretty easy to get quick at changing the belts. Besides, you'll want to get a good scroll chuck like the Talon and even a decent knock-off is $100. (Talon more like $200.)

-Craig

Re: Jet Mini - EVS or Non - EVS?

#8

Get some hands on *LINK*

Phil Joines Krum, Tx

>There are 5 turning clubs in north central Texas now.

The closest is the Dallas Area Woodturners. The others are the Golden Triangle Woodturners in Denton, The Woodturners of North Texas in Fort Worth, The Hunt County Woodturners in Greenville and the East Texas Woodturners in Tyler.

If you're friend can't get to any of the meetings they could stop by one of the Freedom Pens turnouts that are coming up.


AAW club info page

Re: Jet Mini - EVS or Non - EVS?

#9

Re: Jet Mini - EVS or Non - EVS?

Don Henthorn

>The variable speed gives you no advantage over the non EVS except convenience. How often do you change speeds in normal turning?

Re: Jet Mini - EVS or Non - EVS?

#10

Re: Jet Mini - EVS or Non - EVS?

Barry Turner

>In my opinion, "No." In the limited size range of the Jet Mini, I think EVS is a waste of time and money. For most things I turn with my Mini, I just pick an intermediate speed and turn away.

On my Stubby 750, EVS is invaluable because of the capacity to turn large, out-of-round and heavy blanks.

Save your money and get the belt-drive model.

Re: Jet Mini - EVS or Non - EVS?

#11

Re: Jet Mini - EVS or Non - EVS?

Phil Powell

>I've read several pros and cons on this subject just let me add. This morning

I roughed 8-8.5 inch maple bowls on my EVS Mini. Just now I was finishing

a few dry bowls made some time ago on this lathe. But wait.....because I have

an EVS Mini and with the written help from one of the readers here on "Wood

Central" I now have reverse so sanding goes very quickly. Do that on your non

EVS model.

Re: Jet Mini - EVS or Non - EVS?

#12

Re: Jet Mini - EVS or Non - EVS?

RonZ

>I think so. I work with different speeds and it would be a royal pain to change belts. Reasons for different speeds; hi/lo for diameter of the work, sanding, finishing on lathe, buffing, parting off....etc.