Scotch brite paaads?
eaglesc
>Can anyone post the equivalent grits or "X's" in regards to color?
Not just fine medium or extra fine?
Knowledge You Can Build On — Est. 1998
Scotch brite paaads?
eaglesc
>Can anyone post the equivalent grits or "X's" in regards to color?
Not just fine medium or extra fine?
Re: Scotch brite paaads? *LINK*
JL
>They have them graded like steel wool. The fine (white) are about the equivalent of 4-0. The tan are about 0 or 2-0. Hopefully this link will work.
http://multimedia.mmm.com/mws/mediawebserver.dyn?IIIIIIrP0UXIbl3Ivl3IIIuNJt1mA68B-
Scotch Brite Pads
Re: Scotch brite paaads? *LINK*
JL
>Another link.
More pads
Re: Scotch brite paaads? *LINK*
George Van in WI
>One more link.
Pad vs Grit
Re: Scotch brite paaads?
eaglesc
>Thansk for the links.
I notice I didn't see the green ones listed.
Re: Scotch brite paaads?
Chuck Engstrom
>Hi folks -- I queried 3M about this a couple of weeks ago in an effort to locate what they eventually told me is referred to as the Gold colored Scotch Brite (I had described it as light rust color). I had found one single pad of this somewhere and liked it a lot -- very very fine. Here's the low-down:
7447 maroon pad = has an aluminum oxide mineral and is a very fine grade with a scratch equivalent of 400
7448 light gray pad = has a silicon carbide mineral and is a super fine grade with a scratch equivalent of 1000
7745 gold pad -- comes in perforated rolls alllowing you to tear off as needed. Scratch equivalent of 1200. May be harder to locate; full part number is PN07745. It's shown in pic with white and grey 3M.
We didn't discuss the white, which I have often heard has no actual abrasive in it.
Best--
Chuck Engstrom
Chestertown MD
Re: Scotch brite paaads?
William Duffield, on the Cohansey
>Be careful. There are other manufacturers of these abrasive pads, and they don't all follow 3M's standards for color, grit size or abrasive.