Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Lathe Turned Cabochons PICs

Posts

Lathe Turned Cabochons PICs

#1

Lathe Turned Cabochons PICs

Ed Davidson

>I've been using store-bought cabochons in bottle stoppers, yo-yos and boxes for quite a while, and have always been frustrated with the very limited selection of round cabs (color, texture material and size). So, with all the polyester resin stuff I've been playing with recently, decided to try making (turning) some cabs from scratch...here's my first batch:

The brown one's are made with powdered oxidized copper. All the others are made with fine glitter.


This little Maple box is my first application of a homebrew cabochon. The box measures about 2.5" x 2.5" and the copper cab is 1.5" in diameter.


Best regards,

Ed D.

Re: Lathe Turned Cabochons PICs

#2

Re: Lathe Turned Cabochons PICs

Ed Moore

>Ed,

I think I belong on the third row of your picture -- because I'm green with envy. They look great. I have delayed getting some cabochons for boxes , but you have motivated me to get moving on that.

Ed

Re: Lathe Turned Cabochons PICs

#3

Re: Lathe Turned Cabochons PICs

William Duffield, on the Cohansey

>Those are great!

But, why limit them to plastics and composites? Using contrasting highly figured wood scraps should also be effective, for example, bits of burl, dense birdseye maple, ebony, holly, purpleheart, bloodwood, yellowheart, silky oak, zebrawood, snakewood, etc.

Several years ago, I made some earrings in shapes similar to your cabs, from wood scraps. Instead of gluing them into a round mortise, I just glued the hardware (clips or pins) to the flat back surface. Of course, with earrings, one needs to match two of them for curve, figure and color.

Re: Lathe Turned Cabochons PICs

#4

Re: Lathe Turned Cabochons PICs

Barney Loden

>Having just purchased yesterday a large batch of cabochons at the national gem show here in Franklin for exactly the same things that you are making, I'm interested in the process you are using to produce your cabochons.

Interesting how much your item looks like the ones I do.

Barney Loden

Re: Lathe Turned Cabochons PICs

#5

Re: Lathe Turned Cabochons PICs

Bill Crommett

>Ed : The cabs are good, but the wood is gorgious !! What is it called ?

Re: Lathe Turned Cabochons PICs

#6

Re: Lathe Turned Cabochons PICs

RonZ

>Nice idea! I have been using the left over pieces of tru-stone I have when I make pens with them. They don't vary in size much but you get a nice turquois, lapis, or malachite.

Re: Lathe Turned Cabochons PICs

#7

Re: Lathe Turned Cabochons PICs

Ed Davidson

>Thanks Bill...the box is made from burled Maple.

best regards,

Ed D.

Re: Lathe Turned Cabochons PICs

#8

Re: Lathe Turned Cabochons PICs *LINK*

Ed Davidson

>Barney,

I'll probably set up a photo tutorial webpage on this in the next week or two. But in the mean time, here's a quickie:

Using commonly available two-part Polyester Resin, mix your colors/textures and pore into a mold. Let it set till hard (couple days), then cut a round out on the band saw. Attach the round to a chucked waist block using double-sided tape and turn a shape to your liking. Wet sand to 600 grit and polish using any of the plastic polish compounds, and you're done.

There are several great Polyester Resin and acrylic casting how to’s on another site, intended for pen-makers, but the basic process and sources of supply are common...check the link below for articles on the subject:

best regards,

Ed D.


How-to's

Re: Lathe Turned Cabochons PICs

#9

Re: Lathe Turned Cabochons PICs

CapeMayMike

>Excellent Ed! This answers the question of where to obtain cabs other than the usual sources and sizes. Thanks!