Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Lathe mounted 12in sanding disk

Posts

Lathe mounted 12in sanding disk

#1

Lathe mounted 12in sanding disk

Bob R

>A while back there was some info on making a 12 inch spindle mounted sanding disk and a table mounted on the lathe bed for sanding segmented bowl parts. I have looked but can't find the thread. Please help.

Thanks

Bob R

WestMac Turning

Re: Lathe mounted 12in sanding disk

#2

Re: Lathe mounted 12in sanding disk *LINK*

Jeff Gerardot, Indianapolis IN

>I found it in the turning archives, see link below. One of the responses discusses the sanding disk idea.


http://www.woodcentral.com/cgi-bin/archives_turning.pl?read=39205

Re: Lathe mounted 12in sanding disk

#3

Re: Lathe mounted 12in sanding disk

Bob R

>THANKS

That gives me a lot of answers to others questions also.

Bob R

Re: Lathe mounted 12in sanding disk

#4

Brad Vietje

Re: Lathe mounted 12in sanding disk

Brad Vietje

>First, a disclaimer: I don't make segmented turnings, and all my hollow forms are one piece, or single pieces with an applied spout.

That said, I thought I'd throw out that ShopSmith has re-introduced a neat twist on the 12" disk sander -- a 12" disk with a 4 degree conical shape, and specially-shaped adhesive sanding disks that fit it. The idea is that you tilt the work table to 4* to be perpendicular to the conic shape, so when you then pass a piece of wood across the sanding disk, it only contacts along a narrow strip, instead of sanding the entire flat surface at once.

Anyway, I thought this might have some interesting applications to segmented turning, so I thought you might want to look into it. The Shopsmith web site is www.shopsmith.com, but nowadays you have to be a registered user to see all that's there -- you could always request a catalog for more info.

Safe Spinning,

Brad Vietje

Thetford, VT

Re: Lathe mounted 12in sanding disk

#5

Re: Does this help

Russ Fairfield

>I prefer the fixed table because it is always lined up with the disc. I have another made for 30-degrees and one for 45-degrees.

An advantage of the sanding disc on the lathe is the variable speed. I like about 500 RPM. Commercial discs running at 1750 RPM can burn the wood and remove it too fast to be useful for fitting segments.


img

Re: Lathe mounted 12in sanding disk

#6

Re: Does this help

Bob R

>Big Thanks to both Brad and Russ.

All help is very welcome.

Again THANKS

Bob R