Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

AC Drive / Controler

Posts

AC Drive / Controler

#1

AC Drive / Controler

Stuart Johnson

>W.C. posted about his AC drive getting very hot. I pulled up I think a TECO manual where someone posted a wiring question. The manual said it should not be used near flammable stuff or in a dusty enviroment.

Are there special ones made for lathes or do they not get hot enough to actually be a problem?

Re: AC Drive / Controler

#2

Re: AC Drive / Controler

phil in NJ

>Oneway (at least) enloses the drive in a steel box with a gasket that prevents dust from getting to it.

Some drive manufacturers do produce versions for hostile environments...

The operating temperature of the electronics (and therefore the heatsink) probably won't get hot enough to set anything on fire... and most drives have thermal protection anyway.

Fuses isolating the drive from main power need to exist to offer

protection in the case of a failure of the drive itself.