Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

mold on the anchorseal

Posts

mold on the anchorseal

#1

mold on the anchorseal

Tom Sontag - St. Louis

>It was a considerable effort but I managed to make about 190bf worth of blanks from a box elder log. They fill a pallet. And about half of them are curly. So that's nice.

I applied a heavy coat of anchorseal all around because these will live (until sold) in our metal building which is getting blazing hot these days and ruining a number of other turning blanks that were just end coated. I stacked them close to retard drying and now the whole mess smells like another science project. Mold. Probably too thick on the anchorseal. The white fuzzy mold is appearing on the outside of the pile so I doubt restacking would help. I would hate to find out I am blue staining this stuff, although I am not sure white fuzzy mold and blue stain are related. Any ideas? I have no indoor climate controlled space for these things. If I scrape off some wax, aren't I just asking for checks?

Re: mold on the anchorseal

#2

Re: mold on the anchorseal

Jim King

>Soak the blanks in a heavy solution of water and swimming pool chlorine for half an hour let them dry and do it again and let them dry for a few days until you see the first hairline cracks and then wrap them in stretch wrap or wax all sides. This will result in little or no mold problem. We use a pound of powdered chlorine and half pound of Borax in 5 gallons of water.

Re: mold on the anchorseal

#3

Re: mold on the anchorseal

Gary Evans Tallassee, TN

>Tom,

If you are growing mold, you need a little more airflow. Set up a fan blowing in the direction of the stack. Keep a close watch and re-direct the airflow if you observe any cracking on the outside pieces. What you are looking for is a drying rate that will split the difference between growing mold and growing cracks.

Gary