Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Just an FYI

Posts

Just an FYI

#1

Just an FYI

Carole in VA

>In researching the various lathes on the market, I had narrowed my search to either the Big Mustard or the Nova DVR and am leaning towards the DVR. I had heard various comments concerning problems with the locking of the banjo and tailstock on the Nova and wrote to Teknatool to ask if this problem had been remedied and also asked about the height of their stands. This is their reply:

Hi Carole

Thanks for your enquiry. The height of the Cast Iron Stand is 805mm, but I don't have information on the steel stand, sorry.

The Nova 3000 problem (banjo/tailstock locking) was addressed at the time, and was never a problem with the DVR.

I hope that helps, sorry I don't have info on the steel stand - although Woodcraft may have some info as they are the ones who market it.

Feel free to contact us with future queries.

Kind Regards

Alaina Swain

Teknatool International

Re: Just an FYI

#2

Re: Just an FYI

Stuart Johnson

>Carole,

FWIW, I was at Woodcraft this past weekend and they had a DVD, One-Way 1640 and 3520 standing side by side. I wasn't able to turn on them so don't have any thing to go on other than look. Of the three OW was by far the best for fit, finish and just plain wow. The PM beat the Nova in solid feel. Of the three I would purchase the PM if for no other reason the sliding headstock. I could not see for my application why I would want to spend twice the funds for the OW.

I have a Nova 3K and other than it isn't VS I think it is a great lathe and will meet all of my needs for some time. I also have a '98 Dodge Ram but still look at the new ones as well as Fords even though I know I'm not going to purchase.

Re: Just an FYI

#3

Re: Just an FYI

Carole in VA

>Hi Stuart

Basically it boils down to my physical ability to handle the weight of individual parts like the tailstock (or the entire lathe with another pserson or two) and the fact that I can build a custom stand for the DVR at the correct height for me. With the outboard rig, the DVR will handle as much of a blank as I am physically capable of handling. It's MT2 on both HS and TS so it matches stuff I already have, and last but not least, budget. I'm glad to hear that you are happy with your 3K.

Re: Just an FYI

#4

Re: Just an FYI

Earl Eyre

>You do have a good point about handling the monster (3520). I have one and love it. But I weigh 180 pds, am reasonably fit (for a 65 yr old) and it's all I can do to lift off the tailstock, which I do a lot. The glory of the sliding head is being able to move it down and work off the end of the lathe, but I usually want to start the rough out with the tailstock.

After my Delta I didn't want a lathe where I had to try to rebuild the stand so it wouldn't bounce around. That's the main reason I didn't get the DVR. But the day will soon come when I will make some kind of stand I can just slip the tailstock onto and roll it away. Dispite the heft issue the 3520 is awesome.

Earl

Re: Just an FYI

#5

Re: Just an FYI

Barry Irby

>Carole, I have had a Nova DVR for several years and really like it. I built a cabinet for it with a space in it for several hundred pounds of sand. There are also six drawers in the cabinet where I store chucks and other accessories. The headstock does not slide, but it rotates. I think that would address anything you might want to do.

I sometimes wish I had bought a bed extension so that I could push the tail stock back further and just park it. I remove it fairly often. I am thinking of making a hinged little platform that I can slide it onto and tip it over out of the way. It's not 180 lbs, but it is somewhat hefty.

Have you contacted Tim Geist, mentioned in a post above about a reconditioned one? If I had known then what I know now, I would have bought one of his. If you can't find it let me know and I will post his name and address.

Incidentally, I put a drain plug in my cabinet so I can drain out the sand if I must.

Re: Just an FYI

#6

Re: Just an FYI

Ed Heuslein

>Howdy Carol:

Well, I just have to put in my $.02 worth. I have a Nova 3000. I also have a PM 3520. The BIG, and real difference is in the weight. I won't go into all the details, but for the little difference in price (shop around), I wouldn't hesitate - "Yellow power all the way"! Wait for the model B - from the Symposium posts I've been seeing, it will be worth the wait.

For those who wonder why, I do most of my work on the PM. However, my vacuum chuck system is hooked up to my Nova and I just couldn't do without it. I'm too lazy to hook it up to my PM and really don't have a reason to! Besides, the Nova is great for quick smaller jobs.

Happy turning.

Ed