Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

adhesive for open-segmented

Posts

adhesive for open-segmented

#1

adhesive for open-segmented

K.S.SONG

>Hi.

I would like to buy "SEG EASY COMBO 24/4 AND 18/4 , item no. 991-0184" of woodturnerscatalog.com.

Let me have your recommended adhesive for open-segmented vessels.

I use Tite bond two majorly for segmented bowl, but not open-segmented.

It is afraid of coming out of eccess bond to opened-vacancy between segments.

If there are no good solution, should I remove those eccess bond by manual way with knife absolutely?

Are there any better way to minimize unclean residual adhesives in vacancy between segments?

Hope your helpful comments advice.

K.S.SONG / SEOUL KOREA

Re: adhesive for open-segmented

#2

Re: adhesive for open-segmented

Mike D.

>Mr. Song,

I am fairly new to making open segment bowls. I have been using Titebond 2 and using pipe cleaners to remove the excess glue while it is still wet. I have pretty good results with this method so far.

Have a good day,

Mike

Re: adhesive for open-segmented

#3

Re: adhesive for open-segmented

K.S.SONG

>Thanks, Mike

"pipe cleaner" is strange for me, please let me know about it.

Better with a picture.

K.S.SONG

Re: adhesive for open-segmented

#4

Re: adhesive for open-segmented *LINK*

George Van in WI

>You can go to the link below to see pipe cleaners.


Pipe Cleaners

Re: adhesive for open-segmented

#5

Re: adhesive for open-segmented

Don Henthorn in Smithville, Texas

>The link did not work for me. Just went to MS.

Re: adhesive for open-segmented

#6

Re: adhesive for open-segmented *LINK*

K.S.SONG

>Here is correct link. Thank you George Van.

By the way, it may very difficult to get pipe cleaner in Korea

due to very few pipe smoker.

Anyway, I have to try to find out its substitute in Korea unless

import them from U.S.A.


pipe cleaner