Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Wood ID?

Posts

Wood ID?

#1

Wood ID?

Joseph

>I found this piece of wood stacked in an old firewood pile on the back porch of an old tenant house on my property. All the other wood that was there was pecan and red oak, but I can't figure out what this one peice is. It has red spalt lines running through it...I've never sen red spalt before.

I'm in Mississippi if that helps.


img

Re: Wood ID?

#2

Re: Wood ID?

tek-Brunswick, Ohio

>Are the red streaks mostly in the heartwood? If so you probably have a nice piece of Box Elder, also known as Manitoba Maple or Ash Leaf Maple. The bark looks about right. I like turning Box Elder. The red streaks and other grain figure in it usually makes for an interesting piece. It is a little soft, but turns well. It has a distinctive odor when turned. I whish I could describe the smell. I don’t find the odor pleasant or unpleasant, just distinct. if it sets around wet for too long it will get blue stain in it, which usually ruins the red streaks.

Re: Wood ID?

#3

Re: Wood ID?

Carole in VA

>I agree. Looks and sounds like Box Elder. Here's a pic ( I hope)


img

Re: Wood ID?

#4

Re: Wood ID?

Joseph

>Thanks a ton!!!!

Now I just have to get out to the bandsaw and cut a few blanks.

Re: Wood ID?

#5

Re: Wood ID?

Keith Newton

>Joseph, You might also like to know that the red or pink will fade away in a year or two.

Re: Wood ID?

#6

Yummy

Jim Shaver - Oakville, Ontario

>Wow Carole,

Where are you keeping that, I can see a box coming out of that beauty piece...Nice!

Take care,

Jim

Re: Wood ID?

#7

Re: Yummy

Carole in VA

>Hi Jim,

I have yet to try a box. I need to learn on some lesser pieces of wood before I try it on this one. :)

Re: Wood ID?

#8

Re: Wood ID?

John Trant (Baltimore/DC corridor)

>I have a red box elder bowl I turned 10 years ago that is just as vibrant as the day I made it. Maybe even more so in that some of the red is turning a deeper brick red (presumably on its way to brown). It is finished with a bunch of coats of either Waterlox, lacquer, or Watco (I was just as likely to use one as the other at that time). It is out on display but it does not get any sunlight.

My point: you are right that the color will eventually change (tones or intensity) but a well protected can substantially delay the enevitable. The application of a "good finish" is often substituted for a "quick and dirty" approach by too many turners.

My $0.02 (bill me)

John ;-)