Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

confused about shear scraping

Posts

confused about shear scraping

#1

confused about shear scraping

DWFII

>I'm having a hard time getting my head around the cocept of shear scraping. I mean I know how to do it but I can't figure out how to do it inside a bowl. It seems to me that if you use a dedicated scraper inside a bowl it ought to be pushed from rim to interior in order to avoid tearing the fibers. Is that right? Or have I got it all backward? Depite my rationalizations there, I nevertheless generally use the scraper from center towards the rim. (it just seems a natural movement) But that might very well be the reason I have trouble with torn end grain.

I generally hollow a bowl cutting towards the center. But sometimes, especially after the bowl has assumed it's almost final shape I will pull the gouge toward the rim. Trouble is, this seems to tear endgrain, too.

On the other hand, shear scraping with a gouge inside the bowl seems like it might be dern near impossible. Is there a way to do that?

In all events, I am having some problems with torn grain...despite the fact that I have a sharpening jig and use it religiously. So I must be doing something wrong.

Can anyone clear this up for me?

DW

In the High Desert of Central Oregon

Re: confused about shear scraping

#2

Keith Tompkins

Re: confused about shear scraping

Keith Tompkins

>HI DW, you may pick up a massive scraper made just for this purpose....to use it, keep the cut above center. This will help avoid a big catch if the tool digs in. The tool should also be angled down a bit. You can shear with the bowl gouge on the inside, but it's pretty tricky.....use a lower rpm to avoid catches.

If you are not using a curved rest, that would be a good thing to purchase, it makes the job a lot easier, less tool marks to clean up, and few catches with the scraper.

PS...could you post a few photos of your custom boots? I would love to see them.

Re: confused about shear scraping

#3

Re: Boots

Ed Thomas, Leaside (Toronto) Ontario

>Keith,

If you want to see some of his boots go to his website. Substitute www. for the "frommer@" in his email address frommer@bootmaker.com . Lotsa nice pictures there. ;-)

Ed

Re: confused about shear scraping

#4

Re: confused about shear scraping

DWFII

>Keith,

I do have a curved rest and I do run at slow speeds. When I speak about torn grain, I'm having trouble with bowls ...so maybe I really mean "face grain."

In any case the real question involves the direction of the scrape--from center to rim or vice versa??

Ed's right with regard to photos of my boots. [BTW, thanks Ed] I run a web forum (for bootmakers) myself so I am very cautious about promoting myself or my boots on Wood Central or other similar sites...especially since posting a pic would be pretty egregiously off topic. I could pm you some pics if you get real interested or have some idea of what you are looking for/hoping to see.

DW

In the High Desert of Central Oregon

Re: confused about shear scraping

#5

Re: confused about shear scraping

Pat Mulligan

>I have the same trouble you're talking about.The way I take care of it is take light cuts-get it the best I can-and finish with the sander.I do a lot of spot sanding with lathe stopped (DUH) and keep lathe speed slow while power sanding.Practise is the only way to get better at this.Pat

Re: confused about shear scraping

#6

Re: confused about shear scraping *LINK*

joaz

>Hi all, take a look at the shear scraper on my web site.

I have had a lot of positive feedback on this tool. It has cut down my sanding time dramaticly.

It works great on the inside of bowls and works on outside as well although a little more difficult till you get the hang of it.

Try it!!


http://www.maine-web.com/woodturning

Re: confused about shear scraping

#7

Re: confused about shear scraping

Spence in Rhode Island

>I converted a couple of old gouges per Joaz's instructions on his web page. All I can say is that it works great! Give it a try.

Regards

Spence