Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Grizzly chuck

Posts

Grizzly chuck

#1

Grizzly chuck

Harvey Stolz

>the vicmarc look alike has been out for sometime now. Has anyone bought one and do you like how it works?

Thanks

Harv

Re: Grizzly chuck

#2

Re: Grizzly chuck

Peter Barron

>I bought one about two weeks ago and I like it very much. Seems to be well made. I thought I would give it a try because it is so much less expensive than some of the others I have heard about. The action is smooth and positive. I may buy another to have a different set of jaws should the need arise. It probably would not handle large bowls, but since I am starting out it suits me fine.

One problem though. The allen wrench used to adjust the jaws has a molded plastic "T" handle. Of cource I broke it right away, but then I am new to the world of chucks and may have overtightned it. It is not a big deal to me because I already had two sets of "T" handle wrenches, so I have two more to go before it becomes a problem.

I am not sure how much my opinion counts, but I am pleased.

Re: Grizzly chuck

#3

Re: Grizzly chuck

John Lucas

>Harvey I purchased mine about 2 months ago and have used it a bunch lately. I think it would handle a fairly large bowl if you cut a dovetail tenon and stop and tightn the jaws every so often. I think it's a great deal. Not as good a chuck as the vicmarc, which I have 2 of but it certainly is worth $89.

Re: Grizzly chuck

#4

Re: Grizzly chuck

David Lykins - Marietta GA - guitardude

>Hi guys, I'm not sure we're talking about the same Grizzly chuck, but I saw the thread and thought I'd asked if anyone had purchased one of the H6267 Chucks. I've got an older full size Delta lathe and would like to do more bowl turning without having to glue a peice of scrap wood on the stock and then saw it off after the bowl is turned.

Here's the one I'm interested in:


img

Re: Grizzly chuck

#5

Re: Grizzly chuck

Jennifer@Indy.USA

>Harvey,

There was a gentleman in my class at Arrowmont who just bought 5 of them for their club. He said they are a great buy for the money. I'm considering one too.

Jennifer

Re: Grizzly chuck

#6

Re: Grizzly chuck

john lucas

>David

That's the very chuck I bought. They copied Vicmarc it's just not built as well. I still haven't brocken the T handle but since it's just a hex wrench you can buy something similar at the hardware store.

Re: Grizzly chuck

#7

Re: Grizzly chuck

Don Henthorn in Smithville, Texas

>I also received mine yesterday to use in those few times when it will help. It seemed a little ragged the first time I moved the jaws in and out, but I guess the burrs have been smoothed some becuase it is smoother now. I haven't used it yet. The two T handled wrenches appear strong enough but the one for the jaw screws was a number 2 instead of a number 3 and would just spin in the screw heads. The nice lady at Grizzly said she will get the right one in the mail for me. A question by a nubie: is there a secret to getting the correct angle on the tenon to fit the dovetail or is that not critical?

Re: Grizzly chuck

#8

Re: Grizzly chuck

john lucas

>Don

The angle of the dovetail isn't critical. I just eyball it. What is critical is making the tenon short enough that the bowl itself rests on the top of the chuck face. This keeps the bowl blank from rocking and helps the chuck hold the wood. I've used straight tenons and angled tenons and both work but I feel like the dovetail shaped tenon holds better.

Re: Grizzly chuck

#9

Re: Grizzly chuck

woodspinner/ Bill Hale

>Try to get the angle the sane as the jaw, eyeball and practice.

Cut the tennon to the inside diameter of the jaw plus about 1/8 th in.. If you make it to large the grip is only on the points of the four jaws.

Good turning and be safe

Bill in Casa Grande, AZ.