Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

More log dump maple

Posts

More log dump maple

#1

More log dump maple

Mike Schwing from Md.

>But different species! Ambrosia maple, about 10" wide. Finished by sanding to 12000 with micro mesh, then a few coats of mylands sealer, knocked off in between with Liberon steel wool. Buffed on all 3 wheels.

This was a bowl I used for a finishing demo at our club a few months ago. To say the least, club members were astonished at how a finish like this can be achieved in under an hour. I'll be writing a short article on the process for one of the magazines soon and will run down the details here tomorrow for anyone not reading it a few months ago.

Comments welcomed.


img

Re: More log dump maple

#2

edit...

Mike Schwing from Md.

>This is actually a very, very high sheen finish, almost glossy, but I try so hard to avoid hotspots in my photos I managed to completely mask any shine.

Re: More log dump maple

#3

Re: More log dump maple

Dick Parr

>Very nice Mike, Beautiful shape and I love all the markings in the maple. Great job!

Re: More log dump maple

#4

Re: More log dump maple

Jim Shaver - Oakville, Ontario

>Again Mike, a great finish on a nice find!!

Take care,

Jim

Re: More log dump maple

#5

Re: More log dump maple

DWFII

>I think this is beautiful.

I am looking forward to your run-down on your finishing technique. Thanks for offering it.

DW

In the High Desert of Central Oregon

Re: More log dump maple

#6

Re: More log dump maple

pfduffy

>Beautiful as usual, Mike. You "keeps us all pushing against the traces". Phil

Re: More log dump maple

#7

Re: More log dump maple

Jennifer@Indy.USA

>Wow..that is a beauty Mike. Love the simplistic form.

Bravo on this one!

Jen

Re: More log dump maple

#8

Forgive me...

Peter Teubel

>...if this is a dumb question, but why are you sanding to 12K MM BEFORE applying sanding sealer? I means, it would seem to me that you just killed your smooth finish by using the steel wool, not to mention the tripoli (both of which are more abrasive than 12K MM). Obviously it works (absolutely beautiful piece!), but it just doesn't make sense to me.

Re: More log dump maple

#9

Re: Forgive me...

Mike Schwing from Md.

>This is exactly the stir that I started last time I posted this routine. My short answer, and this is not to be flip - it works for me.

I do it because the finely sanded surface is pretty much sealed, almost burnished, and the sealer does not sink in to the surface, but forms a nice film on top that is easily worked with steel wool. I am rubbing the finish with the fine wool, not the wood (maybe some though admittedly). I've tried it by sanding to an equivalent of steel wool, it just does not produce as nice a result.

Give it a try yourself Peter - you might be surprised.

Re: More log dump maple

#10

I will...

Peter Teubel

>Thanks, Mike.

Re: More log dump maple

#11

formula

Jack Savona

>An eye for wood + an eye for design + technical proficiency = WOW!

Jack Savona