waterproof finish
Meg Stevens
>Hello- I am looking for a waterproof finish that can be applied to the project while it is still on the lathe. I have been using a friction polish but it is not waterproof. Any suggesiton would be greatly appreciated.
Knowledge You Can Build On — Est. 1998
waterproof finish
Meg Stevens
>Hello- I am looking for a waterproof finish that can be applied to the project while it is still on the lathe. I have been using a friction polish but it is not waterproof. Any suggesiton would be greatly appreciated.
Re: waterproof finish
woodspinner/ Bill Hale
>If you can find it Valspar makes a sanding sealer that I use on the lathe. It is in an aerosol container or can. I spoke with the Valspar rep and he told me that the sanding sealer is just thined varnish.
Spray or wipe on and IMEDIATELY wipe off with cotton cloth. Keep moving the cloth surface so as not to form any lumps on the finish.
Be sure to let it dry for an hour or so between coats. A couple of coats and a great finish. Try it, you will like it.
Good turning and be safe
Bill in Casa Grande, AZ. HOT HOT HOT