New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Sanding Thuya Burl

Posts

Sanding Thuya Burl

#1

Sanding Thuya Burl

Dave Winters, Steamboat Springs, CO

>Anybody using Thuya Burl? I'm having a helluva time sanding this stuff. It must be full of pitch, because the sandpaper loads up INSTANTLY. Crepe rubber helps clean it up a little, but jeez!

Any suggestions for keeping paper clean on resinous woods?

Thanks--

Re: Sanding Thuya Burl

#2

Re: Sanding Thuya Burl

Jim King

>I think if you boiled the piece and after drying it would sand perfectly.

Re: Sanding Thuya Burl

#3

Re: Sanding Thuya Burl

Dave Winters, Steamboat Springs, CO

>Maybe, Jim, but not an option. I'm reworking an existing sculpture for a client. I'll post a quick pic.

I did some research on Thuya- I guess it's root burl from some kind of evergreen in Morocco. That accounts for the pitch and the heavy pine-y smell. The wood looks a little like redwood burl. Lots of eyes but not much chatoyance really.


img

Re: Sanding Thuya Burl

#4

Re: Sanding Thuya Burl

john lucas

>Dave

I've been playing with the screen like sanding paper that they use to sand drywall. It works great for resinous wood on the lathe. Someone sells it to fit RO sanders but I would have to dig to find it.

Re: Sanding Thuya Burl

#5

Re: Sanding Thuya Burl

Dave Winters, Steamboat Springs, CO

>Good call, John, thanks. I hadn't thought of that. I'll give it a try and post results.

Re: Sanding Thuya Burl

#6

Re: Sanding Thuya Burl

Dave Peebles Lyons, Ohio!

>Hi Dave,

I have only turned one piece of Thuya burl, But I don't remember having any sanding problems. But it may be like most woods... every one is different. I had the added advantage of power sanding while it was on the lathe. It looks like yours is mostly hand work. :(

Good luck with it,

Dave


img

Re: Sanding Thuya Burl

#7

Try some soft paste wax

Nick Stagg

>Dave,

When I turn thuya, cocobolo, Bois de Rose etc. I always use a soft wax. Creamed beeswax works great, but any soft wax will do. The paper will still load up but the cutting action is better and heat build up is minimized. I'm afraid you don't need to worry about heat!

Good luck. Nick

Re: Sanding Thuya Burl

#8

Re: Sanding Thuya Burl

john lucas

>Dave

You can get the paper from www.eagle-america.com It's called Mirka Abranet. It's expensive but I haven't found anything better for oily woods. The only stuff I had was sheet goods so I had to hand sand. I've been drooling over the RO sander sheets ever since but haven't talked my self into spending the money.

Do a search for Mirka Abranet on the web and you'll find other sources, possibly with smaller quantities.