Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

a little magic

Posts

a little magic

#1

a little magic

John K Jordan

>For those who missed it, last night was the new Harry Potter book release. There were big parties at the larger bookstores before the book was sold at one minute after midnight. I bought a Jet mini lathe earlier this week just for this and set up on the sidewalk in front of Books-a-Million and turned magic wands last night.

Wow, I thought people might be interested in seeing some woodturning, but I did not anticipate the response! I took a bunch of blanks for the lathe and about 30 wands I'd made earlier. I hoped to sell a few but since I've never tried selling anything, I was prepared to just have fun turning.

I sold every wand, sold every one I could turn in about five hours, and have a page full of orders!! With no experience in this, I struggled with deciding how to price and ended up pricing from $10-$35 depending on the wood, how much detail/effort it took, and how much I liked the result. No one argued over the price although a few left when they heard the price. Some people bought two or three.

At times there were 30 or more people crowded around, many clutching their choice of blanks, waiting patiently for their wand to be made. Some people waited patiently for over two hours. The lady at the end of the queue begged me to stay until her's was done - she would pay anything, just name the price!

I'm pretty slow and never imagined myself as a production turner, but I got a lot faster as the night went on. I heard someone in line say it was taking about 7 minutes per wand, but I think some took at least twice that long. (I also heard someone say, "hey, watch this guy carving magic wands" :)

I haven't added up all the orders yet, but from the cash sales alone I made enough money to pay for the Jet mini and stand (plus enough for a few more Jets just like it!) There were a number of large and small people interested in learning to turn who took Woodcraft class literature with them. Some had come to that bookstore because they had heard about the woodturning on the news. BTW, I had some other turnings with me just for display (bowls, pens, gavel, tops) and could have sold all of them if so inclined.

The TV station was there and the woodturning got front page mention in the newspaper this morning. A good time was had by all!

Here are some photos in case anyone is interested. For those looking to make some money with this sport, turning wands might be the touch of magic you were looking for. I think the next Harry Potter movie comes out this fall.

JKJ in East TN


img

Re: a little magic

#2

some wands

John K Jordan

>Here are some of the wands. I used a variety of local and exotic woods: black walnut, cherry, maple, eastern red cedar, buckeye, cocobolo, purpleheart, lacewood, macacauba, tarara, bloodwood, rosewood, etc. The bloodwood was especially popular.

I make these mostly out of 1" stock but can squeeze one from 3/4" if necessary! I generally trim down the blanks on the bandsaw to make the wand shaft a little thinner to save some turning time, turn a short #2 morse taper on one end, drill a small hole in the tailstock end to prevent splitting, and do most of the turning with a 3/8" gouge and 1/2" skew. Finish is beeswax for the cedar and Myland's friction polish for the others. The #2 morse taper works like a jam chuck to help keep the entire wand from flexing so much. I have to do most of the turning with the tool in my right hand (usually braced against my forearm) with the left fingers playing steady rest to support the work.

JKJ in East TN


img

Re: a little magic

#3

more wands

John K Jordan

>Actually, just the handles!


img

Re: a little magic

#4

last picture

John K Jordan

>I promise!


img

Re: a little magic

#5

Re: a little magic

Ron In Drums PA

>Great Idea!

But don't show this to my daughter.

Re: a little magic

#6

JL

Re: a little magic

JL

>Glad to see it proved successful - that means you can afford a new lathe!

Re: a little magic

#7

Re: a little magic

Jack Savona

>John, what a great idea to do the wands at the event.

I saw someone turning wands at the Albany Symposium last October. Anticipating the book opening this spring, I took samples to two bookstores and sold 10 to one and 6 to the other for $15 apiece. I'll be anxious to see if they sold (sell) any.

For my handles I used scrap poplar, mahogany, and maple and drilled a hole to accept a wand tip made from a regular dowel, which I turned separately in a Jacobs chuck. Your method was SO much simpler and more logical. I really like the look!

Here's what some of mine looked like.

Jack Savona


img

Re: a little magic

#8

You rock!

Mike Schwing from Md.

>Thats absolutely great John! Great thinking, very entrepreneural.

Re: a little magic

#9

Re: a little magic

Michael Stafford

>What a wonderful and fun way to introduce young people to this hobby we all love.... Great job, John, excellent!!!!!

Re: a little magic

#10

Brian McKearney

Way to go!

Brian McKearney

>Great idea - way to go, John!!!

Brian

Re: a little magic

#11

Re: a little magic

Jennifer@Indy.USA

>Fantastic John! Great idea....and I'm sure the hat didn't hamper sales either. It looks like everyone, especially you, had a blast.

I love stories like this. This is what it's all about....just having a great time!

Thanks for sharing your fun.

Jennifer

Re: a little magic

#12

Re: last picture

TomW in SouthJersey

>What a great idea. It looked like it was fun for you and all the people watching. Letting them pick a piece of wood for their wand was a very nice touch.

Tom Wright

Re: a little magic

#13

Steven Antonucci

My wife wanted me to do it -last minute of course!

steve antonucci

>Wow- 35 wands! My wife went to a small store in the neighborhood at 10:30, and was home by 12:15. My son went in his costume (straight from London), lightening bolt on his head (magic marker), and his official Harry Potter glasses (logo and all). And of course one of my wands...

opportunity lost.

Steve

Re: a little magic

#14

Re: a little magic

Gary Evans, Tallassee, TN

>What a great idea, John!

Is that a genuine sorting hat? Which house did it put you in?

I wish I had known you were going to be there. I would have been happy to help out.

Gary

Re: a little magic

#15

Re: a little magic

Barry Turner

>Congrats.......very nice looking wands. Do they have any magical properties?

Re: a little magic

#16

Re: a little magic

john Lucas

>They make money appear. Apparently. If I did them some lawyer would probably show up and demand money from the copyright or some kid would poke his eye out and I would get sued.

Re: a little magic

#17

Re: a little magic

William Duffield, on the Cohansey

>A great story, John.

My lathe's too big to carry to the library, but your method of conjuring up a smaller one is inspirational.

This week, I only turned one wand, and gave it away to the son of a good friend. I wasn't paying close attention to the Harry Potter schedule, but LOML had recently introduced him to the Merlin books by Mary Stewart, after we found out he is a Harry Potter fan. He read The Crystal Cave and The Hollow Hills, and really enjoyed them, so my wife hunted down The Last Enchantment and The Wicked Day at a library far from the banks of the Cohansey for him. Anyway, when his mom showed up to pick up the two books, she found the wand with them. The timing was perfect, and serendipitous, as he was going to a Harry Potter event that evening at our local library. (If I don't get a "Thank you" from him, I just might turn him into a frog.)

I have turned a few other wands previously. I use a different method, which I find works OK for me. Handle and shaft are different woods, joined with a couple inches of 1/4" or 5/16" dia. round mild steel stock. The bit of steel magically adds a lot of mass and improves the balance of the wand, so I prefer it to wooden dowel rod, and the steel is about the same price. I just cut it to length with a hacksaw. Making the wand in two pieces also reduces the whip while turning, so I can more easily use more fragile wood and turn wands that appear lighter.

I drill a 1" deep hole to accept the steel dowel in the handle stock and another in the shaft stock. I mount a Jacob's chuck in the headstock, and make a mandrel with a 4" length of the same steel stock, and chuck the mandrel in the Jacob's chuck. After turning and finishing either the handle or the shaft, I can back off the tailstock and finish the end right on the mandrel. Then, the budding magician can independently choose the shape and species of the handle and the shaft. Twice the magic, right? A couple drops of CA (Call it what you like, maybe griffin tears, and make a label) quickly assembles the three pieces. If I cut the steel dowel a bit short, there is room to insinuate a phoenix feather or dragon scale or eye of newt within the assembly, and even do it while the apprentice wizard is watching.

If I could remember the right incantation, maybe I could get the wand images out of the camera and onto WoodCentral, but mine surely don't carry any more powerful spells than the ones John turns.

Ain't it great that kids are reading again!?!

Re: a little magic

#18

Re: a little magic + How To........

Ruth Niles

>John, you really did a wonderful job. A few years ago I posted directions for turning "magic" wands in response to a query. I retrieved it to copy here. For those who never saw this, hope you enjoy it.

"It all depends on what kind of magic you're talking about. "Black

Magic" would need to be made from wood like ebony or black walnut.

It's best to drill a hole in the blank, pour the magic in and glue a

plug in the hole. You don't want Black Magic seeping out and floating around your shop. It's not food safe and just might settle on a bowl blank. Don't apply a sealer finish, it takes the magic too long to penetrate when the owner wishes to use it's power.

If you want a stardust, pumpkin-changing magic wand, you can use almost any wood. The magic is poured into a pre-drilled hole in the bottom, same as above. This magic wand can have a sealer finish because you will drill very, very tiny holes around the top so when the owner waves the wand, the magic floats out like a spray of stars. This magic is food safe so no disclaimer is needed.

The length of any wand must be in proportion to the owners' height

(this is required by child-safety regulations; they could poke their eye out). A 15" magic wand is your standard

government-approved length for children over 6 yr. of age.

It's not a good idea to turn a lot of beads and coves as it plays down the "magic", which likes to be the dominating feature of the wand.

Hope this helps. I've made several but they just disappear at night

after I lock up the shop."

Ruth

Re: a little magic

#19

Brad Vietje

ATTA-GO, John ! Good PR for woodturning !

Brad Vietje

>

Re: a little magic

#20

Thanks for the kind words

John K Jordan

>Thanks, everyone, for the kind words and encouragement! That was the first time I ever stuck tool into wood with more than one person watching so I was a little nervous, but all worked out. I didn't break one wand! (As a comparison, I broke two from figured bubinga this afternoon, foolishly turning between centers instead of my usual jam chuck method.)

One thing I forgot to mention - most of those wands in the photos were experiments, some of which I didn't even like much. I tried nearly every shape I could think of and kept them all for comparison and critique. Someone bought each experiment. If I'd anticipated the demand last week, I would have made about a hundred more quick experiments.

Also, I did try making them different ways, including making the handles separate. Some are even in three parts, like one made from walnut with a maple ring just in front of the handle (not photographed). For me, once I perfected the jam chuck and finger steady rest method, making them in one piece turned out to be a lot quicker than making in pieces and assembling.

BTW, one big reason to use the morse taper jam chuck method rather than a conventional chuck is the clearance. Pressing the spindle into the morse taper gives a lot more room to work at the headstock end since the big chuck and jaws are not in the way. Another reason: on the short Jet mini some wands were too long for either a conventional chuck or a drive center, but fit nicely when pressed directly into the drive spindle.

One other thing I discovered about long thin spindles. If you run into some vibration, try adjusting the pressure from the tailstock a little. Sometimes adding just a bit more pressure or backing the tailstock off a little hits the "sweet spot" and the vibration smoothes out.

A bad experience: I discovered that along with cocobolo, I must be sensitive to at least one other wood. A rash and itching on my arms, neck, and chest kept me awake much of Friday night. I haven't narrowed it down yet, but I have a stong suspicion it was the Eastern Red Cedar since I turned a bunch of that Friday and others here reported similar problems. I'm going to do sensitivity tests. BTW, the cedar was popular with the kids.

Oh, another thing - the kids were far more interested than I expected in the different kinds of wood and where they came from. I told stories of the walnut (from a tree on my wife's farm when she was a kid), the cherry (from a famous potter's display booth), from a oak tree that smashed into my yard, wood from California, wood brought by a missionary from Brazil, etc. I took a box of all the side trimmings (little 1/8" thick flat sticks) and gave them to the kids - ("You mean I can take one home, for FREE??") I should have given out little pieces of sandpaper as well. If I do something like this again I think I'll make up a display with various woods, perhaps pictures of trees and leaves.

Don't forget to make some wands for the little Harry Potter fan friends and family come Christmas!

JKJ in East TN

Re: a little magic

#21

Re: Thanks for the kind words

Feix B.

>what a great story; You are a great guy!