We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I cannot see one of these in person but am wondering about the headstock locking lever. I am assuming that the handle (D)in this pic is in the "unlocked" position and that when it is locked, is it out of the way behind the headstock?
What you see is pretty much what you get. The angle might be a little further down towards the bed. I thought you were thinking Powermatic or one of the other big boys? You can only throw a 15-16" bowl with the 1642 (but you can turn a nice, long leg or stile).
Actually, the handle can be swung around the other way so that it protrudes toward the back of the lathe. I have mine facing that way right now. To do so, you need to pull the headstock off, swing the handle around, and re-install the headstock. (A heavy operation to say the least, but not too difficult.) The locking mechanism is a lot like a tailstock's locking mechanism.
>JL, doesn't that handle get in the way??? I WAS thinking about a PM (and at one point even a Oneway) but recent expenses (tree removal, vet bills, etc.) have set me back quite bit. Seems like there is always something demanding the dollars set aside for a new lathe! I can still research the various lathes though, just in case I get a windfall! LOL I am looking at the Nova DVR as well.
>You can also slide the headstock all the way down to the other end of the bed and turn something of larger diameter, using a stand-alone toolrest. This lathe will also take a bed extension, if you want to turn bedposts, for example. The mounting holes are already tapped into the end of the bed.
>>Sheesh, why don't they put it on like that to begin with!
By "repositioned", he didn't mean you have to take it off and put it back on, it just swings either left or right, locking in both positions. It is unlocked when pointing straight down. I think they put it to that side for the photo so they could add the little "D" label and arrow, otherwise it would be hidden. I have my locked back behind the motor.
BTW, I think you will LOVE this lathe. It is well made, has plenty of power, lots of features, long bed, good banjo/toolrest, etc. If you get one, you might need some help getting it set up. I unloaded and set up mine by myself (took about 30 minutes) but it would have been simpler with another person.
I see what you are looking at, and it is just an illusion. In the photo it appears that the lever is in the way of the turning stock, but in reality, it is not. It only looks that way because of the angle of the photo, and the two-diminsional limitations of a photo. In reality, the lever is not in the way of anything.