New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Question for high-budget lathe buyers *LINK*

Posts

Question for high-budget lathe buyers *LINK*

#1

Ellis Walentine

Question for high-budget lathe buyers *LINK*

Ellis Walentine

>Have any of you checked out Laguna Tools lathe? I have seen it and my initial opinion is that it is a really high-capacity, fully featured lathe. I would like to know what you know or have heard about it. Does anyone here own one? What has been your experience.

This lathe looks like a serious contender. What do you think?

Ellis Walentine, Host


Pinnacle Lathe

Re: Question for high-budget lathe buyers *LINK*

#2

Re: Question for high-budget lathe buyers

Mark Mandell - Gone Round In Jersey

>Ellis,

Spoke to someone who checked one out at a show. They were dutifully impressed, but said it's a commercial production spindle-turning machine rather than something for bowl or hollowform makers.

Beyond that, don't know, never been there.

Mark

Re: Question for high-budget lathe buyers *LINK*

#3

Re: Question for high-budget lathe buyers *LINK*

Juergen

>If you get what's shown in the picture this lathe seem to give reasonable value.

There's also a more affordable Laguna lathe at the link below


http://www.lagunatools.com/lathe1200.htm

Re: Question for high-budget lathe buyers *LINK*

#4

Keith Tompkins

Re: Question for high-budget lathe buyers

Keith Tompkins

>Hi Ellis, I have seen this lathe in action...my first reaction was Wow!This thing is massive. I believe it's made in Bulgaria. The bed section can be removed to create a huge bowl lathe. The only real problem I noticed was that the belt-drive system seemed woefully inadequate for such a robust machine. The lathe uses a single v-belt and four-step pulleys. I would like to see a cogged-tooth belt setup or something similar. Their bandsaw are impressive as well.

Re: Question for high-budget lathe buyers *LINK*

#5

Re: Question for high-budget lathe buyers

Sean Troy

>Have you seen the new Robust lathes? Looks like some thought went into them. Sean

Re: Question for high-budget lathe buyers *LINK*

#6

Re: Question for high-budget lathe buyers

Steve Mushinski

>Ellis,

Two members of our turning club own them. They really like the power. If you want I can give them a call and get a very good idea of the long term thinking of how good it is.

One was bought in the spring. He was all set to pick-up a OneWay but they didn't show up at the wood show so he bought the competition. Not sure I would have done that but I am a buy in North American kind of guy "when I can".

Steve

Re: Question for high-budget lathe buyers *LINK*

#7

Re: If You Want It Done Right,

Mark Mandell - Gone Round In Jersey

>"Check it out" yourself, Boss, in KC. Laguna will have 4 "booths" at the AAW, and I rather doubt they would leave their lathes at home.

You ARE going to KC, right?

Mark