"Stand in front of the lathe." - Rude Osolnik
Peter Teubel
>My practice comes with each piece (ala Raffen/Osolnik). When in production, I would grab a days work (8 to 12 blanks) and rough/shape the outside on all...one right after the other. Then I would do the inside...one after the other. Then sand one after the other. Then finish the bottoms...one after the other. This afforded me plenty of practice doing a specific task/technique/whatever many times in a row.
I did the same when learning to make small (5x7), collared hollow forms. The first day was spent figuring out the hollowing rig and minimizing the tool changes/setups. The rest of the week was doing one after the other...all the while experimenting with slightly different techniques/shapes/etc. When I showed them at one of our turning club meeting I got quite a laugh from the members. I was showing the progression of my early work to my later work which was more refined. When asked what the time frame was, I said that my "early" work was Tuesday and my "later" work was Friday. I think I did about 30 pieces that week.
Awhile ago, I saw an article in the AAW journal by Nick Cook on making snowman Christmas ornaments. Cool...looked like good skew practice (at the time I didn't know how to use the skew very well). Well, I spent a weekend turning nothing but those ornaments (over 150). I actually ran out of spindle stock so I ripped some 2x4 framing studs into turning stock (cutting out the knots, of course). Ever try turing that stuff? NO WAY to get a good finish off the any tool...but by the end of the weekend, I was skewing no-sanding-needed ornaments. I was quite good with the skew after that and its become my 2nd favorite spindle work tool (my severe angle detail gouge is still my favorite).
My point is that you can take a different approach to "practice". Either make shavings for the sake of practice or do something in production-mode and the practice will be built-in. I don't mean 2 or 3 things in a row....I mean at least a dozen in a row. Of course, not everyone has the time available to them to do production-type work (as I am now learning all to well since re-entering the "working" world again....temporarily). In fact, outside of my classes that I teach (and one that I attended myself), I haven't turned anything since last November. All my free time has been spent PREPARING my shop for turning again (total remodel/refit/upgrade).
Either way, it comes down to the same thing....hours in front of the lathe...LOTS of 'em!