New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Walnut Toxicity Revisited Question?

Posts

Walnut Toxicity Revisited Question?

#1

Walnut Toxicity Revisited Question?

Barry Irby

>About a week ago posted asking a question about walnut toxicity versus the chance it was a piece of river birch. Shavings had gotten under my watch and inflamed my arm. It is still not healed, but the information has subsided. Yesterday I went back to finish the project. I was more careful, did not wear the watch, used a higher quality paper mask, ran the DC during sanding, etc.

The place under my watch is better, no further reaction, but my nose gave me a fit. Must have sneezed fifty times last night and it ran and ran. A small amount of blood. Got a headache. (Rare for me)

I have worked with walnut a lot over the years. My son and I joke about "blowing black" after turning it. Never had a reaction before either on my skin or in my nose. The mask, DC, air filter are all better than ever before.

OK, I'm finally to the question part. This wood I'm turning is part of a commission. It was short logs about 15" long and 16" in diameter. It has been sitting around for years and is weathered and badly checked and cracked. It was sitting on a farm at the base of a silo when I went to pick it up. I'm chain sawing it into blanks, trying to rescue any that is mostly sound and making stools out of it.

I just turned a large walnut bowl last week and had no adverse reaction. My question is, what do you think the chances are the wood has been sprayed with something like weed killer or bug killer? Could I be reacting to something on the wood, not the wood itself?

Re: Walnut Toxicity Revisited Question?

#2

Re: Walnut Toxicity Revisited Question?

Bill Crommett

>It sounds like you may have hit on the real problem, but you will never know until you turn another piece of unrelated Walnut.

Re: Walnut Toxicity Revisited Question?

#3

Re: Walnut Toxicity Revisited Question?

Ken Grunke from SW WI

>Barry, that same exact thought entered my mind as I was reading your post, before I got to the last sentence. Whatever's in that wood is nasty stuff, not good for your health or possibly even the health of those ending up with the final products. I'd stop working with it and get rid of it, but don't burn it!

Re: Walnut Toxicity Revisited Question?

#4

JL

Re: Walnut Toxicity Revisited Question?

JL

>Sitting around for years? How about mold or a fungi of some sort? Especially as it was sitting around at the base of a silo. I have allergic reactions to certain molds myself (so do a lot of people - penicillin allergies).

Re: Walnut Toxicity Revisited Question?

#5

Good thoughts

Barry Irby

>I went to the drug store to get some ointment for the place on my wrist. It struck me as peculiar it would persist for a week if it were an allergy to the wood and I had washed it off and treated it with Cortisone. The Pharmacist looked at it and said "looks almost fungal." The sapwood is certainly spalted and nearly rotted. I have turned spalted stuff before without a reaction.

The problem is the wood belongs to the client and he cut it off his home place. I'm sure he doesn't want to hear it is contaminated.

Re: Walnut Toxicity Revisited Question?

#6

Re: Good thoughts

Pat Mulligan

>No sense making yourself sick. I would find some other wood.I think your customer would understand.